Operation Manual

28
3.1 Projector Web Control - Schedule Settings (continued)
The schedule settings are shown below.
Item Description
Schedule
Click the
[Enable]
check box to enable the schedule.
Date (Month/Day)
Congures the month and date.
This item appears only when Specic date (No. 1-5) is
selected.
Click the [Apply] button to save the settings.
The current event settings are displayed on the schedule list. To add additional
functions and events, congure the following items.
Item Description
Time
Congures the time to execute commands.
Command
[Parameter]
Congures the commands to be executed.
Power
Congures the parameters for power control.
Input Source
Congures the parameters for input switching.
My Image
Congures the parameters for My Image display. (&50)
Messenger
Congures the parameters for Messenger data display. (&51)
Slideshow
Congures the Start/Stop parameters for the Slideshow.
Click the [Register] button to add new commands to the schedule list.
Click the [Delete] button to delete commands from the schedule list.
Click the [Reset] button to delete all commands and reset the schedule settings
from the schedule list.
3. Web Control