Operation Manual

26
The Alert Items are shown below.
Item Description
Alarm Time
Congures the Alarm Time parameters.
(Only
Lamp Time Alarm
and
Filter Time Alarm
.)
SNMP Trap
Click the
[Enable]
check box to enable SNMP Trap alerts.
(Except for
Schedule Execution Error, Lamp Time Alarm,
Filter Time Alarm, Filter Status Notication
and
Transition
Detector Alarm
.)
Send Mail
Click the
[Enable]
check box to enable e-mail alerts.
(Except for
Cold Start
and
Authentication Failure
.)
Mail Subject
Congures the e-mail subject line to be sent.
The subject line can be up to 100 alphanumeric characters.
(Except
Cold Start
and
Authentication Failure
.)
Mail Text
Congures the e-mail text to be sent.
The text can be up to 1024 alphanumeric characters, but
using special characters as per below may shorten this
length.
Special characters " ' : & , % \ and space
(Except
Cold Start
and
Authentication Failure
.)
Click the [Apply] button to save the settings.
• The Filter Error e-mail trigger is dependent on the FILTER
MESSAGE setting in the SERVICE item of the OPTION menu which denes
the period until the lter message is displayed on the projector screen. An
e-mail will be sent when the usage time of the lter exceeds the time limit that is
set. No notication e-mail will be sent if the FILTER MESSAGE is set to TURN
OFF. (&OPTION menu in the Operating Guide)
• Lamp Time Alarm denes the threshold for an e-mail notication (reminder)
of the lamp time. When the lamp hours exceed the limit that is congured in the
Projector Web Control, an e-mail will be sent.
• Filter Time Alarm denes the threshold for and e-mail notication (reminder)
of the lter time. When the lter hours exceed the limit that is congured in the
Projector Web Control, an e-mail will be sent.
• Filter Status Notication can be enabled for either or both Status 1 and 2.
These notications are equivalent to the FILTER indicators on the projector.
(Status 1: off to orange, Status 2: orange to red) Refer to the Operating Guide
for FILTER indicator details.
NOTE
3.1 Projector Web Control - Alert Settings (continued)
3. Web Control