Operation Manual

Item Description

SNMP Port

Congures the SNMP port.

Port open

Click the

[Enable]

check box to use SNMP.

Trap address

Congures the destination of the SNMP Trap in IP format.

• The address allows an IP address or domain name if a

valid DNS server is congured in

Network Settings

. The

maximum length of the host or domain name is up to 255

characters.

Download MIB le

Downloads a MIB le from the projector.

Network Bridge Port

Congures the Bridge port number.

Port number

Input the port number.

Any number between 1024 and 65535 can be used except

for 41794, 9715, 9716, 9719, 9720, 5900, 5500, and 4352.

By default, it is set to 9717.

Click the [Apply] button to save the settings.

3.1 Projector Web Control - Port Settings (continued)

• The new conguration settings are activated after restarting the

network connection. When the conguration settings are changed, you must

restart the network connection. You can restart the network connection from

Network Restart on the main menu(&41).

NOTE

3. Web Control