Operation Manual

19
3.1.3 Network Settings
Displays and congures network settings.
Item Description
Common Setup
Used for conguring settings common to both the wireless and
wired LAN.
Projector Name
Congures the name of the projector.
The Projector Name can be up to 64 alphanumeric
characters. Only letters, numbers and following symbols can
be used.
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.
A projector name is pre-assigned by default.
sysLocation (SNMP)
Congures the location to be referred to when using SNMP.
The sysLocation can be up to 255 alphanumeric characters.
Only numbers ‘0-9’ and letters ‘a-z’, ‘A-Z’ can be used.
sysContact (SNMP)
Congures the contact information to be referred to when
using SNMP.
The sysContact can be up to 255 alphanumeric characters.
Only numbers ‘0-9’ and letters ‘a-z’, ‘A-Z’ can be used.
AMX D.D.
(AMX Device
Discovery)
Congures the projector's AMX Device Discovery settings
so the projector can be detected by AMX controllers within
the same network. For the details about the AMX Device
Discovery, visit the AMX web site.
URL: http://www.amx.com (as of May 2012)
(continued on next page)
3. Web Control
3.1 Projector Web Control (continued)