Operation Manual

1. Connection to the network

1.4.2 Wireless LAN connection set up

Using the standard Windows

7 wireless LAN utility, set up the initial Wireless

LAN settings for the projector as follows:

1.4 Manual network connection setting - Wireless LAN - (continued)

Connection Control : Ad-Hoc

SSID : wireless

Channel : 1

Encryption rating : None

IP address : 192.168.10.254

* You can change these settings using your computer's web browser or from the

projector's Network menu. Refer to section 3.1.3 Network Settings (&20) or

NETWORK menu in the Operating Guide.

1) Select "Change adapter settings" from the

menu on the left side of the "Network and

Sharing Center" window.

2) Right-click "Wireless Network Connection" to open the

menu, and select "Properties".

(continued on next page)

3) Select "Internet Protocol Version 4 (TCP/IPv4)" and click

[Properties].