Operation Manual
72
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
Selecting this item displays COMMUNICATION
menu.
In this menu, you can congure the projector's
serial communication settings using the
CONTROL
port.
• Select an item using the cursor buttons ▲/▼.
Then press the ► button to open the submenu
for setting the item you selected. Or, press the ◄
button instead of the ► button to go back to the
previous menui without changing the setup. Each
submenu can be operated as described above.
• When COMMUNICATION TYPE (
below
) is
OFF, all other items in the COMMUNICATION
menu are unavailable except STACK.
• For serial communication functions, refer to the
Network Guide.
COMMUNICATION TYPE
Select the communication type for transmission via
the
CONTROL
port.
NETWORK BRIDGE (WIRELESS)
NETWORK BRIDGE (WIRED)
OFF
NETWORK BRIDGE: Select this type, if an
external device must be used as a network
terminal between this projector and the computer.
Select WIRELESS or WIRED as your network
connection mode.
The
CONTROL
port does not accept RS-232
commands (
6. Network Bridge Function
in
the
Network Guide
)
OFF: Select this mode to receive RS-232
commands using the
CONTROL
port.
• OFF is the default setting.
• When you select NETWORK BRIDGE, check the
TRANSMISSION METHOD (
73
) settings.
(continued on next page)