Operation Manual

15
This projector is equipped with the NETWORK BRIDGE function.
When the projector is connected to a computer using wired or wireless LAN
communicaton, an external device connected to this projector by RS-232
communication can be controlled from the computer as a network terminal.
For details, review the 6. Network Bridge function in the Network Guide.
Network Bridge Communication
LAN
LAN cable
(CAT-5 or greater)
RS-232
RS-232 null
modem cable
USB wireless adapter
NOTE • The projector may not be able to process the data correctly when
data is simultaneously transferred via both wireless and wired LAN.
Connection
1.
If you are using a wired LAN, connect the computer's LAN port and the
projector's LAN port with a LAN cable. Use a cable per the specications
shown below. If you are using a wireless LAN, insert a USB wireless adapter
into the projector's LAN port.
2.
Connect an RS-232 cable between the projector's CONTROL port and the
RS-232 port of the device.
3.
Turn the computer on, and after the computer has started up, turn the
projector on.
4.
Set the COMMUNICATION TYPE to NETWORK BRIDGE in the
COMMUNICATION menu of the OPTION - SERVICE menu.
Network Bridge Communication