R E T N E
Eye Safety Warnings Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. A stick or laser pointer is recommended to avoid the need for the user to enter the beam. When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. In order to minimize power, use room blinds to reduce ambient light levels. Important Safety Instruction 1. Do not block any ventilation openings.
Declaration of Conformity Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Portland, Oregon 97223-8368 USA We declare under our sole responsibility that this projector conforms to the following directives and norms: EMC Directive 2004/108/EC ErP Directive 2009/125/EC EMC: EN 55022: 2010 EN 55024: 2010 EN 61000-3-2: 2006+A2:2009 EN 61000-3-3:2008 Low Voltage Directive 2006/95/EC Safety: IEC 60950-1:2005; EN 60950-1:2006+A12:2011 Trademarks Apple, Macintosh, iPod, iPod nano, and iPhone are tradem
roductOO verview PP roduct verview 18 20 21 1 2 3 4 5 6 ENTER 7 19 8 9 11 1. Kensington Lock 2. Focus Dial 3. Power Button ( ) 4. Up Button ( ) 5. Enter Button (ENTER) 6. Left Button ( ) 7. Menu Button ( ) 8. Down Button ( ) 9. Auto Source Button ( ) 10. Right Button ( ) 11. IR Receiver 12 13 10 14 15 16 Remote Control 17 1. Power Button 2. Up Button 3. Auto Source Button 4. Menu Button 5. Enter Button 6. Left Button 7. Right Button 8. Zoom Button 9.
Adjust Projected Image Height Adjust the Projected Image Screen Size - Diagonal Projection Distance Screen Size - Width Screen Size - Height (D) (inch) 20 40 60 80 100 120 140 160 180 The projector is equipped with an elevator foot for adjusting the projected image height. (mm) 508 1016 1524 2032 2540 3048 3556 4064 4572 (B) (inch) (mm) 16.97 431 33.94 862 50.87 1292 67.83 1723 84.80 2154 101.77 2585 118.70 3015 135.67 3446 152.64 3877 (C) (inch) (mm) 10.59 269 21.18 538 31.81 808 42.40 1077 52.
Insert SD Card Insert USB Flash Drive CK LO Plug a USB flash drive into the USB connector at the back of projector. Insert an SD card into the slot with the gold contacts facing down. Note • To remove the SD card, simply pull out the memory card from the slot. • Do not remove the SD card while the projector is projecting images from the card. This can cause data loss or damage the card. • Supports SD card size up to 32GB. • The SD card is not included in the package.
How to Use the Multimedia EZ Suite Menu Remote Control Home menu Up Button Menu Button Enter Button Left Button Right Button Down Button Control Panel Up Button Enter Button ENTER Left Button Press p/q to select the menu item that you want to access and press ENTER to enter the menu screen. Note A button guide appears on the bottom of most screens. The guide varies depending on the current mode. Press the corresponding button to select the option or operation.
Viewing Photos Viewing Photos from the USB Flash Drive or SD Card 2. Select Data Source Enter Home Menu Change data source Select [Photo] Select Photo File Preview File Browse file Full Screen mode (see page 9) Note The displayed screen may vary depending on the data source selected in the previous step.
Viewing Photos - Full Screen Display If the slide show function is enabled, photos are played continuously at specified intervals. Note • The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key. • To change slideshow settings, see Photo Settings below. • Use t/u to navigate between the menu items. • Press to select the menu item. • Press to return thumbnail view.
Playing Videos Playing Videos from the USB Flash Drive or SD Card 2. Select Data Source Enter Home Menu Change data source Select [Video] Select Video File Playback File Video Playback mode (see page 11) Note The displayed screen may vary depending on the data source selected in the previous step.
Playing Videos - Video Playback Mode Note • The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key. • Use t/u to navigate between the menu items. • Press to select the menu item. • Press to return video file list.
Playing Music Playing Music from the USB Flash Drive or SD Card 2. Select Data Source Enter Home Menu Change data source Select [Audio] Select Music File Playback File Music Playback mode (see page 13) Note The displayed screen may vary depending on the data source selected in the previous step.
Playing Music - Music Playback Mode Note • The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key. • Use t/u to navigate between the menu items. • Press to select the menu item. • Press to return music file list.
Viewing Documents Viewing Documents from the USB Flash Drive or SD Card 2. Select Data Source Enter Home Menu Change data source Select [Office viewer] Select File View File View mode (see page 15) Note The displayed screen may vary depending on the data source selected in the previous step.
Viewing Documents - View Mode Note • The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key. Full screen view • Use t/u to navigate between the menu items. • Press to select the menu item. • Press to return presentation file list.
USB Display Enter Home Menu Select [EZ Display] Enter EZ Display Menu Connect the USB cable Select [EZ USB] Connect to PC Note The computer will automatically detect the connection and install the necessary driver.
Wi-Fi Display Note When using Wi-Fi Display function for the first time, download and install the EZ WiFi Display Tool software into your PC: From the Windows desktop, double-click "Windows OS". Follow the on-screen instructions to complete the software installation. IP address: 192.168.111.1 Plug in the Wi-Fi Dongle Enter Home Menu Select [EZ WiFi] Select [EZ Display] Connect to PC Select the dongle name listed in the Wireless Network Connection list on the PC.
EZ Mobile Display (Via AP Mode) EZ Mobile allows you to use the media files on your portable device via the DLNA (Digital Living Network Alliance) server To access the media files stored on your portable device, do the following: 1. In your portable device, download a DLNA compatible Digital Media Server from the App Store (iOS) or Play Store (Android) and open the application. (For example, "Pixel Media Server - DMS" > tap .) 2. Plug the optional Wi-Fi dongle (SP-WIFIUSB-2) into the projector. 3.
EZ Mobile Display (Via Client Mode) To access the media files stored on your portable device, do the following: 1. In your portable device, download a DLNA compatible Digital Media Server from the App Store (iOS) or Play Store (Android) and open the application. (For example, "Pixel Media Server - DMS" > tap .) 2. Plug the optional Wi-Fi dongle (SP-WIFIUSB-2) into the projector. 3. Enter the Client Mode in the projector's menu and set the mode ON (Home Menu > [Settings] > [WiFi] > [Client Mode]). 4.
Miracast Display Use Miracast to view peer-to-peer wireless screencast. To start using Miracast, do the following: 1. In your portable device, download a peer-to-peer screencast application from the App Store (iOS) or Play Store (Android). (For example, "MirrorOp Sender".) 2. Plug the optional Wi-Fi dongle (SP-WIFIUSB-2) into the projector. 3. Open a peer-to-peer screencast application on your portable device. (For example, tap ). 4.
EZ Remote Display EZ Remote allows you to remotely control the projector on your portable device wirelessly. To setup remote control, do the following: 1. In your portable device, download the "EZ Remote" application from the App Store (iOS) or Play Store (Android). 2. Plug the optional Wi-Fi dongle (SP-WIFIUSB-2) into the projector. 3. Enter the Client Mode in the projector's menu and set the mode ON (Home Menu > [Settings] > [WiFi] > [Client Mode]). 4. Connect the projector to a Wi-Fi Access Point. 5.
WiFi Concurrent Mode Display Use WiFI Concurrent Mode to view and modify the software and Client Mode Access Point settings.
Adjust Menu Settings for External Input Source Selecting Input Source Once a video source device is connected and turned on, press or on the remote control on the control panel to automatically switch the input source. Available sources are in the following order: 1. VGA 2. HDMI 3. Component 4. Composite 5. Multimedia Note: The start position in the list is determined by the last connected input source.
Using The Main Menu Refer to the below table for details on menu items. Menu PICTURE SCREEN SETTING OPTIONS Menu item Display Mode Brightness Contrast Tint Sharpness Saturation Description Set the brightness of the display. Adjust the brightness of the image. Adjust the contrast of the image. Adjust the balance of the red, green, and blue colors of the image. Adjust the sharpness or softness of the image. Adjust the color intensity. Set advanced settings for projected image.
Media File Support List Video File Type Video Resolution Bit Rate Frame Rate AVI MKV XVID MPEG4 H.264 M-JPEG WMV3 1080P 20Mbps 30fps TS H.264 1080P 20Mbps 30fps DAT VOB MPG MPEG MPEG-1 1080P 20Mbps 30fps MOV MP4 3GP MPEG-4 H.264 H.263 1080P 20Mbps 30fps RM RMVB RV3 RV4 720P 5Mbps 30fps Cook(RA4) AAC(RA9) RACP(RA10) WMV WMV3 1080P 20Mbps 30fps WMA2 WMA3 Photo Image Type (Ext name) Remark No support VC-1 AP H.264 support less than 4 reference frames H.
Specifications Item Model Imager Native Resolution Brightness Projection Distance Projection Screen Size Focus Throw Ratio Vertical Keystone Projection Modes Standard Input Resolutions SDTV/EDTV/ HDTV Video Signal Horizontal Frequency Vertical Frequency Safety Certifications Operating Temperature Dimensions (WxHxD) Power Input Power Consumption Standby Lamp Lamp Life Speakers Input Ports Security Troubleshooting If you experience a problem with your projector, please refer to the following information.
