Specifications

Table Of Contents

Installation Instructions RPA Elite Series Projector Mount

RPM INSTALLATION

Threaded Pipe Installation

1. Carefully determine required mounting location.

IMPORTANT ! : This will require knowing the

lens to screen distance. See projector

specifications for details on determining this

distance.

2. Install ceiling plate and extension accessories

following installation instruction provided by

manufacturer.

WARNING: IMPROPER INSTALLATION CAN

RESULT IN SERIOUS PERSONAL INJURY OR

DAMAGE TO EQUIPMENT! Structural members

MUST be capable of supporting five times the

combined weight of all equipment being mounted.

3. Align RPM with end of NTP pipe.

4. Thread RPM up onto pipe by turning counter-

clockwise until hand tight.

Rough Alignment of RPM

1. Turn RPM clockwise or counter-clockwise until

front of mount is facing target.

IMPORTANT ! : When RPM is properly

positioned, the set screw access hole should be

pointing directly at target.

(see bottom detail in figure at left)

2. Secure RPM to pipe by turning set screw until tight.

CAUTION: DO NOT OVERTIGHTEN!

Overtightening of setscrew can damage threads on

pipe.

3. Turn security screw using a Phillips screwdriver

until set screw cannot be seen through access hole

in RPM.

(A)