Monster Truck Owner Manual

MaxFlight Corporation
750 Airport Road ◦ Lakewood, NJ 08701
Phone: [phone] Fax: [phone]
MT3000 Weekly Inspection Checklist
Week Ending:
Inspected By (print):
Signature:
* These sheets must be filled out completely, kept in your records
and faxed to MaxFlight (Attn: Tech. Support) on a weekly basis.
 Inspect the Roll ERC (Electrical Rotary Contact) and pins for proper
security and condition
 Clean the projector fans and lens (DO NOT USE LIQUID CLEANER)
 Inspect all connections on the Power Distribution Box for security
 Inspect the Pitch ERC and Torque Arm for proper security and condition
 Inspect the counterweight shaft, worm gear and guide rail for any apparent
wear, damage, or binding
 Inspect left and right key-way bolts (both A-Frames) for security
 Inspect the Up/Down, Canopy and Failsafe Sensors for security and proper
operation
 Inspect the A-Frames for signs of “walking” if unit is not secured to floor
 Inspect Harness for any weld cracks
 Inspect safety-wired and visible bolts for security
 Ensure the Daily AM and PM inspections have been complied with for the
past week(See Operators Manual)
 Lubricate the unit in accordance with the Lubrication Diagram(page 26 of
Technical Manual)
 Check the security of all Encoders, ensure the set screws are tight.
GAME LOG READING
Normal:
Hours:
Annotate any discrepancies from previous week and corrective actions
_______________________________________________________
_______________________________________________________
_______________________________________________________
___________________________________________________
_______________________________________________________
_________________