Monster Truck Owner Manual
 Player 
    Emergency, Maxflight I/O , digital, DI0 
5-21B  CREATING AND CONFIGURING THE ARTAFICIAL 
INTELLIGENCE (AI) JOYSTICK(Required on old program 
software) 
On the Maxzilla Truck Simulator, the computer generated (AI) players device must be initiated 
and configured for artificial players to work. This is accomplished using the following procedure: 
Start the regular program—when the program window is on the desktop. 
 Click on “Configuration Icon” – this brings you to the property window 
    Select, if it is there, or create the “Maxzilla Ride Joystick” 
TO Create – click on “Create” select Maxzilla Ride Joystick, select or leave at 
Auto Detect 
 Click “OK” 
 Double Click on “Maxzilla Ride Joystick” this opens the “Properties” window 
Click on –Input Devices tab—ensure “Maxzilla AI Device” is there, if not, create it by 
clicking on “Create” select “Maxzilla AI Device” –click “Device” tab and ensure device 
is started and enabled. 
5-21C Enabling and Calibrating Joysticks/Throttles running USB 
control Boards. 
a.  START on task bar, select Control Panel, select Gaming Options 
b.   USB adapter must be visible 
c.  Click on the adapter and select Properties 
d. Click settings tab 
e. Click Calibrate and follow Wizard instructions 
f.  Select Test and then Apply 
5-21D Steering Wheel/Throttle  setup within Mondo Monster Truck 
program USB Controllers. 
NOTE! Before you can open the Monster Truck Program and make adjustments you must 
minimize the Display Picture window. If you don’t you will not be able to get to the Config icon 
on program window. This is accomplished by; 
 VNC to the on-board computer 
 Double Click on VRSS icon on the desktop 
Scroll to the end of the list once open, find line stating “Full Screen Display=1” 
change the 1 to a 0, save the change and close the file. 
  Open the program control window for Mondo 
 D-click on Configuration icon 
Device Manager---Double Click to open 
Verify USB Interface is listed 
Enable --- USB Interface—Double click on it when other page opens, go to device, ensure it is 
enabled and started. If not do so. Say OK 










