M8 Quick Start Guide 10
Introduction Content Thank you for choosing InFocus M810 phone. It is recommended that you first read the Quick Start Guide to understand the basic operation of the phone. Your Phone ............................................... 2 Installing SIM Card and Memory Card ...... 3 Charging the Battery ................................. 4 Initial Start Up ............................................ 4 Home Screen ............................................ 4 Making Your First Call ............................
Your Phone Proximity Memory Earpiece sensor card tray Microphone Front camera Rear camera Flash Power button Volume (+/-) button Touch screen Back Home Menu Power LED Headset jack Speaker SIM card tray 2 Micro USB port Microphone
Installing SIM Card and Memory Card 4. Locate the memory card tray. 5. Use the included pin tool to open the tray. 1. Locate the SIM card tray. 2. Use the included pin to open the tray. 6. Place the memory card on the tray. Slide the tray back into the phone. 3. Place the SIM card on the tray and slide the tray into the phone. Use the pin supplied in the box only to open the card slot.
Charging the Battery Initial Start Up Before using the phone, it is recommended to fully charge the battery first. 1. Connect the smaller end of the USB cable to the USB port of the device. 2. Connect the other end of the cable to the USB charger or other USB port with power source (for example, laptop). The phone’s Power LED lights on. Warning After installing the SIM card and charging the battery, the device is ready to be turned on.
Making Your First Call To answer a call From the Home screen, tap To answer a call, tap ( ). . To make a call and drag it to the right 1. Enter the phone number on the keypad. 2. Tap to correct any number. Tap and hold to erase the entire number. NOTE: To call a contact, tap from the list. 3. Tap to make a call. 4. To end the call, tap . NOTE: When you tap 5 , it automatically changes to .
Contacts Importing contacts 1. From the Home screen, tap 2. Tap > Import/ Export, and choose to Import/export contacts from or to the SIM card/storage. 3. Select the contacts location that you want to copy to or copy from, and tap . Adding contacts 1. From the Home screen, tap 2. Tap to add a contact. 3. Select one of the location to store the contact to (SIM-only or Phone-only). 4. Enter the contact information such as name, phone number, email address, etc. 5. Tap to save the contact. . 6 .
Sending a Text Message Setting up WLAN 1. From the Home screen, tap . 2. Tap . 3. In the To field, enter the recipient’s phone number or name. 4. Compose your message. 5. Tap to send your message. 1. From the Home screen, tap 2. In WIRELESS & NETWORKS, tap WLAN and turn it to on. 3. Available networks are listed. Tap a network to connect to or tap to manually add a connection. NOTE: Connecting to a secured network will prompt for a password. Enter the password, then tap Connect. 7 .
Setting up Email Account Sending and Receiving Emails 1. From the Home screen, tap 2. Enter your Email address and Password and tap Next. 3. Set the Inbox checking frequency settings and tap Next. 4. Enter Name and Account display name. 5. Tap Next. Once the account setup is complete, the device will automatically retrieve your emails. Composing and sending emails . 1. From the Home screen, tap , tap an email account. 2. Tap . 3. In the To field, enter the recipient’s email address. 4.
Receiving emails Using Browser Emails are automatically received in the Inbox folder when the device connects to a network.To manually retrieve new emails, swipe down to refresh or tap > Refresh. To open a web page 1. From the Home screen, tap . 2. Tap the address bar. 3. Type the URL then tap Go. 4. Tap to open New Tab page or add the page to the Bookmarks. 5. Tap the address bar. 6. Type the URL then tap Go. 7. Tap to open New Tab page or add the page to the Bookmarks.
Using Bluetooth Taking Photos and Videos 1. From the Home screen, tap . 2. In WIRELESS & NETWORKS, tap Bluetooth and turn it to on. 3. Available devices are listed. To search for a new device, tap SEARCH FOR DEVICES. 4. Tap a detected device. 5. To start pairing, enter the PIN then tap OK. NOTE: • The PIN of the device must be the same PIN on the other bluetooth device. • On some devices, tap Pair to start pairing. This device is equipped with rear and front cameras to take photos and videos. 1.
To record video 1. From the Home screen, tap 2. Tap to enter video mode. NOTE: To switch between front and rear cameras, tap . 3. Aim the device at the subject. 4. Tap to stop recording. To take a panorama shot 1. 2. 3. 4. 5. . From the Home screen, tap . Tap and select Panorama. Aim the device at the subject. Tap to take the shot. Move the device slowly toward one direction shown on the screen. 6. When the shooting guide reaches the end of the shooting point, the shooting ends.
Viewing Photos and Videos 4. Swipe your finger to the left/right to view the previous/next file. • To share the image, tap > Share, then tap an application for sharing. • To delete the image, tap , then tap OK. • To play the video, tap . • To upload the file to the cloud storage, and login your tap cloud album. • To play the slideshow, or show more options, tap . • To rate the image, tap . • To edit the image, tap . 1. From the Home screen, tap . 2. Tap a folder to view the recorded files in thumbnails.
Basic Phone Settings Setting an alarm Adjusting the volume 1. 2. 3. 4. From the Home screen, tap . Tap . To add an alarm, tap . To set the time, slide the pointer, and tap Done. 5. To set repeat mode, check Repeat and select the desired week days. 6. To set the ringtone, tap , and select the alarm sound. 7. To vibrate when the alarm sounds, check Vibrate. 8. To enter an alarm label, tap Label and tap OK. NOTE: By default the alarm is set on.
Changing the Launcher layer mode The result is displayed as follows: 1. From the Home screen, tap . 2. Tap . The Launcher+ page opens. 3. Tap Layer mode setting tab. 4. Choose One layer or Two layers.
Important Safety Information Please read before proceeding • Refer to the rating label on the device and be sure that the power adapter complies with the rating. Only use accessories specified by the manufacturer. • Disconnect the device from an electrical outlet and power off before cleaning the device. • NEVER attempt to connect or disconnect the power adapter with wet hands. • Clean the touch screen with a soft cloth. If needed, dampen the cloth slightly before cleaning.
Road and Environmental Safety • The temperature of the device might increase while the CPU is busy handling resource consuming activities such as high resolution video decoding. The SW protection mechanism will ensure stop charging whenever the temperature is over the predefined threshold and prepare for shut down if necessary. Please worry not.
Compliance Information Google、Google Play、Android and other marks are trademarks of Google Inc. microSD™ is a trademark of SD Card Association. SAR Information THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines.
WEEE Notice European Union Regulatory Conformance The WEEE logo on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste.
Note: For France, headphones/earphones for this device are compliant with the sound pressure level requirement laid down in the applicable EN50332-1:2000 and/or EN50332-2:2003 standard as required by French Article L.5232-1. We, hereby, declare that this Smartphone is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This equipment may be operated in: A pleine puissance, l’écoute prolongée du baladeur peut endommager l’oreille de l’utilisateur.
(4) Rough handling, exposure to moisture, dampness or extreme thermal or environmental conditions or a rapid change in such conditions, corrosion, oxidation, unauthorized modifications or connections. This limited warranty (free of defects in materials and workmanship causing malfunction and defective) shall last for twelve (12) months for the device and six (6) months for the battery from the purchase date.
