Projector User's Manual
Table Of Contents
- Table of contents
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Using the menus
- Securing the projector
- Switching input signal
- Creating your own startup screen
- Adjusting the projected image
- Magnifying and searching for details on the projected picture
- Selecting the aspect ratio
- Optimizing the image
- Setting the presentation timer
- Locking control keys
- Freezing the image
- Hiding the image
- Operating in a high altitude environment
- Adjusting the sound
- Personalizing the projector menu display
- Shutting down the projector
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
Introduction 5
Projector exterior view
1. Lamp cover
2. Vent (heated air exhaust)
3. Projection lens
4. Quick-release button
5. External control panel
(See "Projector" on page
6 for details.)
6. Focus ring
7. Vent (cool air intake)
8. Front IR remote sensor
9. AC power cord inlet
10. Kensington anti-theft lock
slot
11. Rear adjuster foot
12. Ceiling mounting holes
13. Rear IR remote sensor
14. Video input socket
15. S-Video input socket
16. RGB signal output socket
17. RGB (PC)/Component
video (YPbPr/ YCbCr)
signal input socket
18. DVI input socket
19. Audio socket
20. 12VDC output terminal
Used to trigger external
devices such as an
electric screen or light
control, etc. Consult your
dealer for how to connect
these devices.
21. USB socket
22. RS-232 control port
23. Speaker grill
PUSH
4
3
2
1
5
6
7
8
Front/upper side
11
14 15 16
17 18
19
20 21
22
23
13
4
10
12
Rear/lower side
9