Projector User's Manual

Operation 45
DISPLAY menu
SOURCE menu
FUNCTION
(default setting/
value)
DESCRIPTION
Wall Color
(Off)
Correct the projected picture’s color when the projection surface
is not white. See "Fine-tuning the image quality in user modes"
on page 35 for details.
Aspect Ratio
(Auto)
There are four options to set the image's aspect ratio depending
on your input signal source. See "Selecting the aspect ratio" on
page 32 for details.
Keystone
(0)
Corrects any keystoning of the image. See "Correcting keystone"
on page 30 for details.
Position
(0)
Displays the position adjustment page. To move the projected
image, use the directional arrow buttons. The values shown on
the lower position of the page change with every button press
you made until they reach their maximum or minimum.
Phase
(depends on the
selected input
source)
Adjusts the clock phase to reduce image
distortion.
H. Size
(depends on the
selected input
source)
Adjusts the horizontal width of the image.
Digital Zoom
(100%)
Magnifies or reduces the projected image. See "Magnifying and
searching for details on the projected picture" on page 31 for
details.
FUNCTION
(default setting /
value)
DESCRIPTION
Quick Auto
Search
(On)
See "Switching input signal" on page 27 for details.
Color Space
Conversion
(RGB)
See "Changing Color Space" on page 28 for details.