Projector User's Manual
Table Of Contents
- Table of contents
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Using the menus
- Securing the projector
- Switching input signal
- Creating your own startup screen
- Adjusting the projected image
- Magnifying and searching for details on the projected picture
- Selecting the aspect ratio
- Optimizing the image
- Setting the presentation timer
- Locking control keys
- Freezing the image
- Hiding the image
- Operating in a high altitude environment
- Adjusting the sound
- Personalizing the projector menu display
- Shutting down the projector
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
Connection14
The final connection path should be like that shown in the following diagram:
Many notebooks do not turn on their external video ports when connected to a projector.
Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a
function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press
FN and the labeled function key simultaneously. Refer to your notebook's documentation to
find your notebook's key combination.
Notebook or
desktop
computer
or
iii
iii
i. VGA cable
ii. VGA to DVI-A
cable
iii.Audio cable