Quick Start Guide de Démarrage Rapide Schnellstart-Anleitung Guía de Inicio Rápido Guida di Consultazione Rapida Snelstartgids Guia de Início Rápido Snabbstarthandbok Краткое руководство ⾔⪬G㐐㣅G㙼⇨㉐ ᖿ䗳ܹ䮼ᣛफ Panduan Ringkas Regulatory model V2000 and M2100 010-0734-02 !*010-0734-02* DISPERINDAG No. 0287/1.824.51/09.
! 1 Please read the safety instructions booklet before setting up the projector. Unpack the box Here’s what’s included: Projector Remote Carry Case USB Cable Computer Cable Power Cable Save the box and packing materials. 2 Put batteries in the remote The remote uses 2 AA batteries. 1 2 3 Please dispose of batteries in an environmentally proper manner. Buy a Full-Featured Remote and Other Custom Accessories www.infocus.
Connect source Color-coded connections make it easy. You can connect more than one source if needed. Connect to: Computer Got an Apple computer? Computer Cable (included) Computer You may need an adapter. For more information, see How-To Guides at www.infocus.com/support/howto OR Connect to: DVD, VCR 1 Connect video using a Composite Video cable or an S-Video cable www.infocus.com/store part no.
Turn on projector and source 4 1 Connect the power cord to the projector and to an electrical outlet The power light 2 on the projector will light amber. Slide open the lens cover Turn on the projector 3 Touch the power light (or press power on the remote). The power light will start blinking green. Wait for the lamp to warm up 4 After a few seconds, the power light will stop blinking 5-10 sec. and turn green. It can take a minute for the lamp to reach full brightness.
Adjust the picture 5 1 Height Projector Location 1 As distance increases, the image gets larger and moves upwards. 2 1 Hold down the release button under the front of the projector. 2 Lift the front of the projector to the desired height. 3 Release the button. 2 Keystone Lens center line Diagonal Screen Size keystone Distance to Screen Minimum Maximum IN2112 and IN2114 Press the keystone buttons to make the picture square.
Using the menus 1 Press menu, then press or to review menus. 2 Press select to enter a menu, then press or to review settings. 3 Press select to change a setting. If this shows more choices, press or to update the setting, then press select or menu to save it. 4 Press menu to go back. Press it again to remove the menu. Note: Most picture settings are disabled (gray) unless a source is being displayed.
(TROUBLESHOOTING) If there is no picture or the picture is blank If the power light is off, make sure the power cord is connected and plugged into a live electrical outlet. If the power light is amber and not blinking, touch the power light (or press power on the remote). Check video source and cables. Make sure the video source (computer, DVD player, VCR, etc.) is turned on and cables are securely connected between the source and the projector.
Questions? We’re here to help! Visit us at: www.infocus.com/support We’re here to support you with your new purchase. We can help you with… • Determining screen sizes • Documentation in other languages • Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.
