100
Please read the safety instructions booklet before setting up the projector. 1 Unpack the box Here's what's included: Projector with Lens Cap Remote Carrying case USB Cable Computer Cable Power Cable Save the box and packing materials. 2 Put batteries in the remote The remote uses 2 AA batteries. Please dispose of batteries in an environmentally proper manner. Buy a Full-Featured Remote and Other Custom Accessories www.infocus.
Connect source Color-coded connections make it easy. You can connect more than one source if needed. Connect to: Computer (using VGA) Got an Apple computer? You may need an adapter. For more information, see How-To Guides at www.infocus.com/support/howto Computer Cable (included) Computer OR Connect to: DVD, VCR 1 Connect video using a S-Video or a Composite Video Cable www.infocus.com/store part no. SP-SVIDEO-10M or SP-CPSTVID-5M 2 Connect video using a HDMI Cable www.infocus.com/store part no.
Turn on projector and source 4 USB computer in HDMI audio out audio in video 1 video 2 1 Connect the power cord to the projector and to an electrical outlet The power light 2 3 4 on the projector will light amber. Remove the lens cap Turn on the projector Touch the power light (or press power on the remote). The power light will start blinking green. Wait for the lamp to warm up After a few seconds, the power light will stop blinking, and the other buttons on the keypad will light up.
1 Adjust the picture Height Projector Location As distance increases, the image gets larger and moves upwards. 1 Hold down the release button under the front of the projector. 2 Lift the front of the projector to the desired height. 3 Release the button. 2 Lens center line Diagonal Screen Size Distance to Screen Minimum Maximum IN1110 Keystone 60"/1.5m 80"/2.0m 90"/2.3m 150"/3.8m 7'10"/2.4m 8'7"/2.6m 10'5"/3.2m 11'6"/3.5m 11'8"/3.6m 12'11"/3.9m 19'6"/5.9m 21'6"/6.
Using the menus 1 Press MENU, then press or to review the menu options. 2 To enter a submenu, highlight the desired submenu and press SELECT. 3 To adjust a menu setting, highlight the desired menu option and press SELECT or . Then press or to scroll through the available adjustments. To save your adjustments, press SELECT. 4 Press the MENU button to exit the menu system. Note: Most picture settings are disabled (gray) unless a source is being displayed.
TROUBLESHOOTING If there is no picture or the picture is blank If the power light is off, make sure the power cord is connected and plugged into a live electrical outlet. If the power light is amber and not blinking, touch the power light (or press power on the remote). Check video source and cables. Make sure the video source (computer, DVD player, VCR, etc.) is turned on and cables are securely connected between the source and the projector. Press the Source button.
Questions? We’re here to help! Visit us at: www.infocus.com/support We’re here to support you with your new purchase. We can help you with… • • • • • Determining screen sizes Documentation in other languages Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.
