IN1100 IN1102 Quick Start English - for other languages, see booklet Français – voir la brochure Deutsch – siehe Broschüre Español – ver folleto Italiano – vedi opuscolo Nederlands – zie boekje Português – consulte livreto Svenska – se häftet Русский – см. буклет 한국어 – 소책자참조 中文（简体）– 见手册 *36.8AZ02G002-A* P/N 36.
Please read the safety instructions booklet before setting up the projector. Unpack the box 1 Here's what's included: Projector with Lens Cap Remote Carrying case USB Cable Computer Cable Power Cable Save the box and packing materials. 2 Put batteries in the remote The remote uses 2 AA batteries. 1 2 + - + 3 Please dispose of batteries in an environmentally proper manner. Buy a Full-Featured Remote and Other Custom Accessories www.infocus.
Connect source Color-coded connections make it easy. You can connect more than one source if needed. Connect to: Computer (using DisplayLink) For Windows Computers* Connect the USB cable between your computer and the projector's DisplayLink connector. See the DisplayLink Manager User's Guide for details on compatibility, features, and troubleshooting. USB Cable (included) * For the latest information about support for other operating systems (including Apple), go to www.infocus.
Turn on projector and source 1 Connect the power cord to the projector and to an electrical outlet The power light on the projector will light amber. 2 Remove the lens cap 3 Turn on the projector Touch the power light (or press power on the remote). The power light will start blinking green. 4 Wait for the lamp to warm up After a few seconds, the power light will stop blinking, and the other buttons on the keypad will light up. It can take a minute for the lamp to reach full brightness. 5-10 sec.
1 Adjust the picture Height Projector Location As distance increases, the image gets larger and moves upwards. 1 2 1 Hold down the release button under the front of the projector. 2 Lift the front of the projector to the desired height. 3 Release the button. 2 Keystone Lens center line Diagonal Screen Size Distance to Screen Minimum Maximum IN1100 60"/1.5m 80"/2.0m 90"/2.3m 150"/3.8m 7'10"/2.4m 10'5"/3.2m 11'8"/3.6m 19'6"/5.9m 8'7"/2.6m 11'6"/3.5m 12'11"/3.9m 21'6"/6.
Using the menus 1 Press menu, then press or to review menus. 1 Press select to enter a menu, then press or to review settings. 3 Press select to change a setting. If this shows more choices, press or to update the setting, then press select or menu to save it. 4 Press menu to go back. Press it again to remove the menu. Note: Most picture settings are disabled (gray) unless a source is being displayed.
Troubleshooting If there is no picture or the picture is blank source If the power light is off, make sure the power cord is connected and plugged into a live electrical outlet. If the power light is amber and not blinking, touch the power light (or press power on the remote). Check video source and cables. Make sure the video source (computer, DVD player, VCR, etc.) is turned on and cables are securely connected between the source and the projector.
Questions? We’re here to help! Visit us at: www.infocus.com/support We’re here to support you with your new purchase. We can help you with… • Determining screen sizes • Documentation in other languages • Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.) • Selecting optional accessories • Product warranty protection plans USA, Canada, Latin America Customer Support Telephone +1 (503) 685-8888 TOLL FREE: 800-799-9911 Mon-Fri, 7 am - 5 pm Pacific techsupport@infocus.
