INF7011 Hardware Guide 009-1465-02
Contents Declaration of Conformity....................................................................................................................................................................... 2 Safety Considerations.............................................................................................................................................................................. 5 What’s Included...............................................................................................
Declaration of Conformity Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Portland, Oregon 97223-8368 USA Trademarks Apple, Mac and Facetime are trademarks or registered trademarks of Apple, Inc. Microsoft, Windows, PowerPoint, Excel and Word are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. HDMI logo and “High Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC.
INFORMATION POUR LES DISPOSITIFS DE POINTAGE OPTIQUE SEULEMENT : Ce produit a été testé pour se conformer à la norme IEC 60825-1 : (1993), y comp. Amd. 2 (2001). Ce produit utilize des DEL qui sont, par nature, de classe 1. Dongle Label: Model : R G -0918 RG-0918 IC :8150A-R G 0918 C MIIT ID:2009DJ 2362 F CFCC C ID: 8HR G -0918 ID: EE8HRG-0918 RG-0918 IC : 8150A-RG0918 CMIIT ID:2009DJ2362 FCC ID: E8HRG-0918 This document applies to regulatory model: INF7021 Input ratings: AC 100-240V, 7.
Page 4
Safety Considerations Please read and follow all safety instructions provided below and on the monitor before connecting the monitor to a power source. Failure to comply with safety instructions may result in fire, electrical shock, or personal injury and may damage or impair protection provided by the equipment. Please save all safety instructions. • This monitor is very heavy and should be moved and installed by at least two individuals.
• Unplug the monitor if you are not going to use it for an extensive period of time. • Unplug the monitor if you need to clean it with the included microfiber cleaning cloth. The screen may be wiped with the cleaning cloth when the power is off. Never use alcohol, solvents or ammonia-based liquids on this monitor. • Wash hands after handling the cables supplied with this monitor. • The monitor remote control, mouse and keyboard use batteries.
What’s Included Wireless Keyboard & Mouse* (Batteries not included) 1920 x 1080 monitor POWER HOME INPUT MENU RESIZE BRIGHTNESS CONTRAST OK BACK Quick Setup Guide INFO i VOL UP MUTE VOL DOWN Documentation Antennas Power cords (varies per country) Stylus Thumb screws Remote control (batteries not included) *Not included for all countries. For setup purposes, a keyboard and mouse are recommended.
Setup Connecting to Other Devices A full range of digital and analog video inputs and audio source devices can be connected to the connection panels on the back and side of the monitor. Available jacks include: HDMI® In (2), VGA In (1), PC Control (1), Microphone In (1), Audio Out 3.5mm (1), Audio In 3.5mm (1), Audio Out RCA (2 – R/L), RJ45 (2), USB-B (1) and USB-A (6).
Connecting AC Power 1) Connect one end of the AC power cord to the AC In jack on the back of the monitor. 2) Connect the other end of the AC power cord to an AC outlet. 3) Press the power switch. (The LED on the front of the monitor turns on.) NOTES: • Your monitor should only be operated from the power source indicated on the label. • Always unplug the AC power cord from the power outlet when you are not using your monitor for an extended period of time.
Setting up the Wireless Mouse and Keyboard NOTE: The wireless mouse and keyboard is not included as a standard accessory for some countries. For initial setup and/or configuration, it may be easier to use a mouse and keyboard. Any standard wired or wireless mouse or keyboard can be connected through the monitor's USB ports. Wireless Mouse 1) Turn the mouse over and remove the battery cover. 2) Remove the USB dongle from its holder in the battery compartment of the mouse.
Using the Remote The remote uses two (2) AAA batteries (not included). Install the batteries by removing the cover from the remote’s back, aligning the + and – ends of the batteries, sliding them in place and replacing the cover. To operate, point the remote at the monitor sensor at the bottom right-hand corner of the monitor. The range of optimum operation is about 26’ (8m) and within a horizontal and vertical angle of 30 degrees.
The remote has the following buttons: Power: Switches the power on or puts the monitor into Standby. POWER POWER Home: Changes the active source back to the embedded PC. HOME HOME INPUT MENU Input: Toggles the Input Source menu on and off, which allows the user to change sources. Options include: HDMI1, HDMI2, PC, and VGA. INPUT RESIZE Menu: Turns the OSD menu on and off. MENU Resize: Switches between screen modes. Modes vary based on the source.
Using the Keypad The keypad, located on the left-hand side of the monitor, has the following buttons: Power button: Switches the power on or puts the monitor into Standby. INPUT OK/SOURCE button: Turns the Source menu on allowing the user to change sources. Saves changes/selections if the OSD menu is on. MENU Menu button: Turns the OSD menu on and off. CH ^ Up button: Moves the highlight bar up when the OSD or Source menu is on.
OSD (On-Screen Display) Menu System The OSD provides the user the ability to control the monitor display. To access the OSD, press the Menu button on the remote or the keypad located on the left-hand side of the monitor. A BC Input Wide CC Picture Audio Settings Use the up and down arrows on the remote or keypad to scroll through the menu options and press OK to enter the highlighted menu. Use the up and down arrows and OK button to select the item you would like to adjust.
Input Menu External devices can be connected to the monitor. To use an external device, you must change the input source in the Input Source Selection menu. Use the up and down arrow buttons to highlight the desired source and press OK.
Wide Menu The monitor can display images in five different modes: Wide, Zoom, Panoramic, Normal, and Stretch. Each mode displays the picture differently. Use the left and right arrows to highlight the desired display mode and press OK. Screen Mode Wide Zoom Normal Stretch Panoramic Normal: preserves the content’s original aspect ratio. Since the 4:3 aspect ratio is not large enough to fill the monitor’s screen, black bars are added to the left and right of the display image.
CC (Closed Captioning) Menu If you are watching a program that is being broadcast with closed captions, you can use this menu to display and change the look of the closed captioning. Use the up and down arrows to highlight the option you wish to change, then use the left and right arrow buttons to make your selections, and press OK.
Digital CC Style: opens the Digital CC Style submenu which allows you to adjust the style, size, color, and opacity of the closed captioning and the background window. Digital CC Style Caption Style Custom Text Size As Broadcast Color As Broadcast Opacity As Broadcast BG Color As Broadcast BG Opacity As Broadcast Window Color As Broadcast Window Opacity As Broadcast Caption Style: allows the user to customize the closed captions or keep them as they have been broadcast.
Picture Menu Use this menu to adjust the look of your displayed image. Use the up and down arrows to highlight the option you wish to change, then use the left and right arrow buttons to make your selections, and press OK. Picture Backlight Brightness Contrast Color Tint Sharpness - + 50 + 50 + 50 + 50 + 0 + 0 More Backlight: adjusts the LED panel brightness. This affects the overall brilliance of the picture. Brightness: changes the intensity of the image.
More: opens the Picture Settings submenu and allows you to adjust the size and position, color temperature (warmth), and other advanced picture settings.
Size & Position: opens the Size & Position submenu which allows you to adjust the size and position of the source image on the displayed area. Size & Position Horiz. Position Vertical Position Horizontal Size Vertical Size - + 32 + 16 + 0 + 0 Horiz. Position: adjusts the horizontal (left/right) position of the display image. Vertical Position: adjusts the vertical (up/down) position of the display image. Horizontal Size: adjusts the width of the display image.
Color Temperature: opens the Color Temperature submenu which allows you to adjust the relative warmth (reddish tones) and coolness (bluish tones) of the image. Color Temperature Color Temperature Red Gain Green Gain Blue Gain Red Offset Green Offset Blue Offset - Normal + 128 + 128 + 128 + 128 + 128 + 128 Reset Color Temperature Color Temperature: provides different predefined color temperature modes to choose from.
Advanced Picture: opens the Advanced Picture submenu which allows you to adjust many advanced features. Use the up and down arrows to highlight the option you wish to change, press OK, then use the left and right arrow buttons to make your selections, and press OK.
Audio Settings Menu The Audio Settings menu allows you to adjust audio settings of the monitor. Use the up and down arrows to highlight the option you wish to change, press OK, then use the left and right arrow buttons to make your selections, and press OK. Audio Settings Audio Mode Balance Lip Sync Flat - TV Speakers SRS StudioSound HD SRS TruVolume + 0 + 0 Off Surround On Advanced Audio Equalizer Settings Reset Audio Mode Audio Mode: adjusts the preset audio modes.
Advanced Audio: opens the Advanced Audio submenu and allows you to adjust the Analog Audio Out volume. Advanced Audio Analog Audio Out Fixed Analog Audio Out: sets the volume control properties for the analog RCA connectors when connected to a home theater audio system. Select Variable to control the external speakers' volume from the monitor's volume controls, or select Fixed to control the external speakers' volume from your home theater system controls.
Equalizer Settings: opens the Equalizer submenu and allows you to adjust the boost or attenuation of the different frequencies. Equalizer Audio Mode Flat Basic EQ Mode Bass Treble - + 0 + 0 Audio Mode: adjusts the preset audio modes. This setting is only available when SRS StudioSound HD is set to Standard. Options include: Flat, Jazz, Classical, Pop and Rock. EQ Mode: adjusts the bass and treble settings. Options include: Basic and Advanced (for fine tuning). Bass: adjusts the bass audio settings.
Settings Menu The Settings menu allows you to change the input source, adjust tuner settings, name the source inputs, setup parental controls, change the OSD (On-Screen Display) language, set the time, adjust the broadcast interactivity setting, adjust CED settings and adjust the indicator LED settings. Use the up and down arrows to highlight the option you wish to change, press OK, then use the left and right arrow buttons to make your selections, and press OK.
Name Input: opens the Name Input submenu and allows you to customize the source input names. Name Input Input Source PC Input Labels PC PC Show Keyboard Input Source: allows you to select the input source you wish to rename. Note: You must select the desired input source before changing the Input Label or using Show Keyboard to enter a custom name. Options include: HDMI-1, HDMI-2, PC, and VGA. Input Labels: allows you to choose a preset input label for the selected Input Source.
Time & Local Settings: opens the Time & Local Settings submenu and allows you to select the correct time zone for your area. Time & Local Settings Time Zone Daylight Savings Postal Code Pacific On 97224 Time Zone: allows you to choose the time zone applicable to your area. Daylight Savings: allows you to choose whether Daylight savings is applicable in your area. Choose On if daylight savings is in effect in your area, or Off if it is not. Options include: On and Off.
CEC Settings: opens the CEC Settings submenu and allows you to control the HDMI-connected devices with the included remote without any additional programming. CEC Settings CEC Function Enable System Audio Control Off Device Discovery Off CEC Function: allows you to adjust the System Audio Control and Device Discovery options. Options include: Enable and Disable. System Audio Control: allows you to control your device's audio using the monitor's remote control.
Troubleshooting Symptom Possible Solutions No power • Verify the power cord is properly connected to the power outlet and to the monitor. • Verify the power switch is ON and that the Power button on the remote or keypad has been turned on (the front LED should be white). • Plug another electrical device to the power outlet to verify that the outlet is supplying the proper voltage. • Verify that a source is active. • The monitor may have overheated. Remove any objects blocking the vents.
Audio noise • Noise can occur when infrared communication equipment (for example, infrared cordless headphones) is used near the monitor. Move the infrared communication equipment away from the monitor to eliminate the noise. No sound • If using a sound bar, verify that the sound bar is connected properly and that the sound bar power switch is turned on. • If a sound bar or an external sound system is not being used, verify that the Speaker setting in the OSD Audio menu is set to Internal.
Specifications To read the latest product specifications, be sure to visit our support website at www.infocus.com/support, as specifications are subject to change. Size (viewable) 69.51” (cm diagonal) Dimensions (without stand) 62.60 x 36.50 x 2.40" Weight (without stand) 72.20 lbs. Monitor Type E-LED Refresh Rate 120 Hz Maximum Resolution 1920 x 1080 Pixel Pitch 0.802mm x 0.
Limited Warranty InFocus Limited Warranty For InFocus Branded Hardware Products Only LIMITED WARRANTY. InFocus’s warranty obligations for the hardware products are limited to the terms set forth herein. InFocus warrants the InFocus-branded hardware products against defects in materials and workmanship under normal use for a period outlined in the Limited Warranty Periods section below from the date of retail purchase by the original end-user purchaser (“Warranty Period”).
temporary procedures or workarounds provided by InFocus while InFocus works on permanent solutions. • Allow InFocus to keep resident on your systems or sites certain system and network diagnosis and maintenance tools to facilitate the performance of warranty support (collectively referred to as “Proprietary Service Tools”); Proprietary Service Tools are and remain the sole and exclusive property of InFocus.
DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS; LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA; OR ANY INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE H
defective part must be returned to InFocus. In cases where it is required to return the defective part to InFocus, you must ship the defective part back to InFocus within a defined period of time, normally five (5) business days, and clearly display the Return Material Authorization (RMA#) on the outside of the shipping carton or a similar package affording an equal degree of protection. The defective part must be returned with the associated documentation in the provided shipping material.
Page 38
INF7011 Hardware Guide Page 39
Page 40
INF7011 Hardware Guide Page 41
Page 42
