User Manual
5. Operation Controls and Functions
5.1 Front Panel
4 / 17
RESET
POWER STATUS LINK VIDEO USB ENC DEC
MODE
USB HOSTUSB DEVICES
2
No. Name Function Description
1
When the product is powered on, the red power LED will be
on.
3
Restore default settings button. Press and hold this button
for 5 seconds in the power-on state to restore the default
settings.
4
System status indicator.
▪ Light on: The system is running normally.
▪ Light flashing/light off: Program firmware lacking or
hardware error.
10G network connection indicator.
▪ Light on: 10G network port is connected with device.
▪ Light off: 10G network port is not connected with device.
5
Video signal detection indicator.
▪ ENC mode: Indicator lighting on means video input is detected.
▪ DEC mode: Indicator lighting on means that HDMI OUT has
video signal output.
6
USB connection indicator.
▪ Light flashing: The product is connected with USB devices,
and there is data transmission.
▪ Light off: The product is not connected with USB devices.
7
8
9
MODE button
Mode switch button. Press and hold the button for 5 seconds to
switch ENC or DEC mode.
10
USB DEVICES
port
USB device ports. Connect to mouse, keyboard or U Disk when
the product is in DEC mode.
11
USB HOST
port
USB HOST input port. Connect to PC when the product is in
ENC mode.
1 2 3 4 5 1110
6 7 8 9
▪ Light on: The ENC mode is turned on.
▪ Light flashing: The SHOW ME mode is turned on.
▪ Light on: The DEC mode is turned on.
▪ Light flashing: The SHOW ME mode is turned on.
STATUS LED
(Green)
POWER LED
(Red)
RESET button
LINK LED
(Green)
VIDEO LED
(Green)
USB LED
(Green)
ENC LED
(Green)
DEC LED
(Green)