User's Guide
19
limited, but the operation must be completed in all three directions c) The rotation axis is
centered on the night-vision itself d) The rotation range must be greater than 360°
Figure 18 Compass calibration
5.9.6 Blind pixel clear
If the night-vision does not conform to the scene of the bright spots or dark spots
(collectively referred to as blind elements), it can be operated to clear the blind pixel.
Under the option of blind pixel clear, press menu button to enter blind pixel clear.
Under the option of blind pixel clear, short press menu button to enter clear mode,
and move the cursor by press power button/photo button (Short press to move 1 pixel,
long press to move 10 pixels). After the cursor moves to the position of blind pixel,
select the option of Add to confirm blind pixel clear, select the option of CXL to
cancel blind pixel clear. Finally, select √ to save and exit or select × to cancel the save
and exit to end this operation.