User Manual

Night Vision Go User Manual
8
The app supports switching between Chinese and English. By default, it uses the same language as your
phone's operating system.
(5) Alarm settings
Above alarm: enter a threshold and save. The phone sounds an alarm when any temperature shown on
the image exceeds the threshold.
Below alarm: enter a threshold and save. The phone sounds an alarm when any temperature shown on
the image is lower than the threshold.
(6) Image optimization
This function is a noise reduction switch and can to some extend improve image quality. However, when
enabled, it consumes more power and may cause some phones with lower-level configurations to stuck.
This function is disabled by default. Decide whether to enable it as required.
3.2.4 Feedback
This is a channel for users to contact us.
3.3 Temperature Measurement Settings
There are two measurement modes: simple and pro. To switch between the modes, use the status control
on the top of the interface.