Night Vision Go User Manual V1.0.0 IRay Technology Co., Ltd. www.infiray.
Introduction to IRay Technology IRay Technology Co., Ltd. concentrates on developing infrared thermal imaging technologies and manufacturing relevant products, with completely independent intellectual property rights. IRay is committed to providing global customers with professional and competitive infrared thermal imaging products and solutions. The main products include IRFPA detectors, thermal imaging modules, and terminal thermal imaging products.
Night Vision Go User Manual ©2021 IRay Technology Co., Ltd. All rights reserved worldwide. All contents in this manual, including words, pictures, images, etc., belong to IRAY TECHNOLOGY CO., LTD. (hereinafter referred to as “THE COMPANY” or “IRAY TECHNOLOGY”). No part of the manual, in whole or in parts, may be copied, photocopied, translated, or transmitted without the prior written permission of IRAY TECHNOLOGY. The product described in this manual is only available for sale and use in Mainland China.
Night Vision Go User Manual Table of Contents 1.Overview................................................................................................................................................................... 1 1.1. Product Overview.........................................................................................................................................1 1.2. Product application.........................................................................................................
Night Vision Go User Manual 1.Overview 1.1.Product Overview The Night Vision Go Infrared Phone Accessory is equipped with an industrial-leading high-performance detector and chip, thus delivering superior imaging quality and taking precise temperature measurements. Smallest and lightest of its kind, it is easy to carry around, yet powerful and features low power consumption. It can be directly connected to a phone and is plug and play, making itself an ideal device for exploring the infrared world. 1.2.
Night Vision Go User Manual 1.3 Product Parameters Detector Resolution 256×192 Pixel Size 12μm NETD ≤50mK@25℃, F#1.0 Spectral Range 8～14μm Specifications Frame Rate 25Hz Operating Temperature -10℃～55℃ Storage Temperature -40℃～85℃ Typical power consumption Processor 340mW Self-developed LY ASIC chip Lens Focal Length 3.2mm Aperture F1.1 Field of View (FOV) 56.0° (H)×42.2° (V), 71.
Night Vision Go User Manual Software Update Online update Parts List Quick Start Guide, Warranty Card, cleaning cloth, carrying box, extension cord, Certificate of Qualification 2.Preparations 2.1 Obtaining Required Software This device must be used together with the Android app in order to access infrared image snapshot, thermography, and other functions from the app. 2.2 Connection Setup Ensure that all permissions required by the installed app are enabled on your phone.
Night Vision Go User Manual Once the device is plugged into and recognized by your phone, the following prompt pops up. Tap OK. If the app has been opened and cannot detect the device, the following interface is displayed. This means that some functions are disabled.
Night Vision Go User Manual 3.App Function 3.1 Overview of the Home Page The app's home page includes upper and lower function areas and an image area in the middle. The upper function area contains ① Personal Center, ② Temperature Measurement Settings, ③ Dual-spectrum Setting, and ④ a Shutter Switch. The lower function area contains ⑤ Palette, ⑥ Image Capture ⑦ Video Recording, and ⑧ Album. The image area is used to display infrared images, measured temperatures, and other information. 3.
Night Vision Go User Manual 3.2.2 About About shows the app version number, firmware version number of the current device, the SN code, an introduction to this product, basic knowledge on infrared, User Agreement, and Disclaimer. 3.2.3 Setting (1) Picture rotation In Picture rotation, you can flip the infrared image horizontally or turn around the visible light camera. When the device lens is in the same direction as the phone screen, the infrared flip is "ON" and the visible light turning is "OFF".
Night Vision Go User Manual (2) Temperature measurement correction With the temperature measurement correction function, you can adjust parameters in default mode. Or you can add custom modes, change the mode name and parameters, then select modes you have defined to quickly switch between different temperature measurement scenarios. Difference between the default and custom modes: The default mode cannot be deleted and can restore the preset temperature measurement parameters of the product.
Night Vision Go User Manual The app supports switching between Chinese and English. By default, it uses the same language as your phone's operating system. (5) Alarm settings Above alarm: enter a threshold and save. The phone sounds an alarm when any temperature shown on the image exceeds the threshold. Below alarm: enter a threshold and save. The phone sounds an alarm when any temperature shown on the image is lower than the threshold.
Night Vision Go User Manual 3.3.1 Simple Mode The simple mode requires no additional action and displays the highest, lowest, and center temperatures by default. To view the real-time highest and lowest temperatures in the measurement frame, drag the frame. The measurement frame can be dragged and stretched. To delete the measurement frame, tap anywhere in the frame.
Night Vision Go User Manual 3.3.2 Pro Mode The pro mode supports temperature measurement by three points, three lines, and three regions. For lines and regions , the highest, lowest, and average temperatures are displayed. Only spot-based temperature measurement supports adding or dragging measurement spots. To delete a measurement spot, tap the spot. This is also the case for other controls.
Night Vision Go User Manual The isotherm scale is used for palettes other than white-hot or black-hot to highlight the temperature zone requiring special attention. The selected zone is displayed in the form of a palette while others are white-hot. When the isotherm scale is in "M" status (see the upper and lower status indicators), adjust the yellow slide on the left to select a temperature range to display in the form of a palette.
Night Vision Go User Manual 3.4 Dual-Spectrum Dual-Spectrum enables the presence of a small window in the image display area to simultaneously display the image taken by the phone camera. The small window supports drag operation. To switch the front and rear camera of the phone, tap the reversal icon in the small window. The horizontal flip of the infrared image is set in Personal Center -Setting - Image Flip. 3.
Night Vision Go User Manual 3.6 Palette By default, the app has white-hot, black-hot, and other palette modes. Select different palettes as you prefer or as required. The palette mode does not affect temperature measurement. However, the isotherm scale only applies to palettes other than white-hot and black-hot. In addition, because colored infrared images are rendered, the data may be damaged after processing. Therefore, the original white-hot image is the clearest. 3.
Night Vision Go User Manual 3.9 Album You can share or delete any photo(s) and video(s) in the app's album and can view their information. The example photo is a pure infrared image taken by this device. Its palette and temperature measurement can be further edited.
Night Vision Go User Manual 4.Precautions WARNING 1. Do not place this product in a humid environment or rinse it with water, to prevent electrical leakage or short circuit. 2. This product is sensitive to thermal radiation. Whether you are using it or not, do not direct its lens to the sun or other heat sources at temperatures above 300℃ for a long time. 3. Please store the product in the supplied pouch or box after use. 4.
Night Vision Go User Manual (4) Q: Why is the measured body temperature not 36°C? A: Different parts of the human body have different temperatures. Skins on the forehead, cheek, and limbs are often exposed. Temperatures at these parts are largely affected by the ambient temperature, ambient humidity, and the grease and sweat on skins. In normal cases, they will not be higher than 36°C. For a person staying in a cool outdoor environment for a long time, a body temperature measured below 10°C is also normal.
Night Vision Go User Manual Worth comes from Service Technical Support Hotline： 24h Hotline: 400-883-0800 400-998-3088 Customized Services 17
