User Manual

Tianxuan M Series Handheld Thermal Camera ·User Manual
15
by dragging the infrared image up-down or left-right with fingers.
 Picture-in-picture Adjustment
This function can be used to adjust the position of the picture-in-picture. First select coarse tuning and fine
tuning, and then adjust the position of the picture-in-picture by the touch screen or navigation keys. When
finished, click OK or enter button to save the settings.
Notes: the PIP can be adjusted via the touch screen, press the infrared region to drag, press any corner of
the infrared region to zoom in or zoom out.
4.12.7 System Settings
 Device Information
Click to check model, version, SD card capacity and SD card remaining capacity.
 Date and Time
Click to set the date and time.
 Units of Measurement
Temperature unit: switchable among Celsius, Fahrenheit, and Kelvin
Distance unit: switchable between meters and feet
 Formatting the SD Card
Click and then press OK to format the SD card as FAT32.
 USB Mode
There are two options for data transmission: USB disk and USB camera.
 Restore Factory Settings
Click and then press OK to restore the settings to the factory settings.