User Manual

Tianxuan M Series Handheld Thermal Camera ·User Manual
14
4.12.2 Above/Below Alarm
 Temperature alarm setting for M200A: set the above alarm or below alarm
 Auto alarm capture switch: click to turn on or turn off the auto alarm capture
 Set the time interval for auto alarm capture
 Set number of captured images for auto alarm capture
4.12.3 Wi-Fi Setting
Click and enter WiFi setting interface.
 Hotspot Switch: turn on hotspot and set the network name and password, then click OK.
Note:
1) The specialized app is needed while this function is enabled. You need connect the hotspot manually
after turning hotspot on, and you can transmit the saved pictures or videos to mobile device to
perform secondary analysis.
2) Turn off hotspot when it is not used, or else the power consumption will be faster.
4.12.4 Set Image Capturing
Auto saving switch for manual image capturing: click to turn on or turn off the auto saving function for
manual image capturing, off by default.
Timed image capturing: click to turn on or turn off the function of timed image capturing
Set the time interval for timed image capturing
Set the number of captured images for timed image capturing
4.12.5 Automatic Power-off
 5Min: click to set automatically shut down after 5 minutes.
 10Min: click to set automatically shut down after 10 minutes.
 20Min: click to set automatically shut down after 10 minutes.
 Off: click to turn off the automatic shutdown function.
4.12.6 Dual-spectrum Alignment
 Dual-spectrum Fusion Alignment
This function can be used to manually align infrared and visible images. First select coarse tuning and fine
tuning, and then perform image alignment by the touch screen or navigation keys. After finished, click OK
or enter button to save the settings.
Notes: the dual-spectrum alignment can be adjusted via the touch screen, the alignment can be achieved