Operating Manual

battery icon will be changed to the USB icon , and the power indicator is green;
 When the external power supply is disconnected, the Cabin series device will
automatically switch to the battery pack and will not shut down.
VIII. Installation and Usage
Operation
WARNING! The lens must not be pointed at any sources of intense radiation energy,
such as laser-emitting devices or the sun. This may damage the electronic components in the
device. Damage caused by failure to comply with the operating guidelines is not covered
under warranty.
 Remove the lens cap (1). Press and hold the power button (5) for 2s to power on the
device. Then, the home screen appears after 3s.
Rotate the eyepiece focusing ring (10) of the objective lens until the image becomes clear
in the eyepiece. After the adjustment, it no longer needs to be adjusted for the same user;
 Rotate the objective lens focus knob (12) to adjust the focal length, to focus on the object
to be observed;
 Setting the image mode: Press the M button (7) to enter the shortcut menu and set the
image palette mode. The options are the
day mode and night mode. The icon on
the lower-left status bar is updated in
real-time;
 Configure the digital zoom, image
mode, display brightness, image
contrast, image sharpness, and so on
(for details, see Shortcut Menu Functions in this manual);
 After using the device, press and hold the Power button (5). Then, the shutdown
countdown screen appears. When the countdown counts from 3 to 0, the device shuts
down. Then, you can release the Power button. The current status will be automatically
saved after shutdown. When the device is powering off and saving data, do not