Operating Manual
The device should be charged at a temperature of 0°C to +45°C. Otherwise, the battery
life will be significantly reduced.
When charging, please do not leave the battery unattended;
Do not expose the battery to high temperature or open flame;
Do not immerse the battery in water;
The battery pack is equipped with a short circuit protection function, but situations that
may lead to short circuits should be avoided;
Do not connect the battery to the power supply for more than 24 hours after it is already
fully charged;
It is not recommended to connect third-party devices that consume more energy than the
allowed value.
Please do not disassemble or modify the battery pack without professional instructions;
Do not knock or drop the battery pack;
The recommended operating temperature for the device is -20°C to +50°C. Do not use the
device beyond this temperature range, or else, it may shorten the battery life.
When the device is used under sub-zero temperature, the battery capacity drops. This is
normal and does not indicate a defect.
Please keep the battery pack out of the reach of children.
VII. External Power Supply
The Cabin series supports external power supplies, such as the portable power source (5V).
Connect the external power supply to the Type-C interface (4) of the device;
The device will automatically switch to the external power supply and charge the internal
battery pack at the same time;
Then, the battery icon on the display will change to the charging icon , and the
power indicator turns red. When the battery pack is fully charged, the indicator turns
green;
If the device is connected to an external power source and no battery pack is installed, the