Operating Manual

- Deer: 1.7m high
- Wild boar: 0.9m high
- Hare: 0.2m high
 Adjust the device to move the target in
the center of the display area. Press or
press and hold the Up button (6) to
enlarge or Down button (8) to reduce the width between the measurement lines, so that
the target is completely between the measurement lines. While adjusting the width
between the measurement lines, the rangefinding data on the left changes accordingly;
 If you want to change the units of measure, press the M button (7);
 Press and hold the Up button (6) + M button (7) to exit this function.
XVIII. Infrared Light ON/OFF
The Cabin series products are equipped with fill-in lights, which can be quickly turned on,
adjusted levels of brightness, and turned off.
 LED lights are off by default. Press the Down button (8) + M button (7) to turn on the
LED lights. At this point, the brightness is in the second level, and the LED icon in the
status bar is displayed as .
 Press the Down button (8) + M button (7) again, the brightness level changes to level
one, and the icon in the status bar is displayed as ;
 Press the Down button (8) + M button (7) again to turn off the LED lights, and the icon
in the status bar is displayed as .
XXI. Wi-Fi
The Cabin series has a built-in Wi-Fi module. The device can connect wirelessly to a mobile
apparatus (laptops or smartphones) via Wi-Fi.
 In the main menu, enable Wi-Fi. For detailed operations, refer to "Main Menu-Wi-Fi".