Operating Manual

"Info";
 Press the M button (7) to query the relevant information
about the current device;
 Press the M button (7) or the Power button (5) to exit and
return to the upper menu.
XV. PIP Function
Picture-in-Picture (PIP) provides a floating window independent of the full screen. This
window shows part of the image which is enlarged to 2× in a certain area centered on the reticle of
the main image.
 On the home screen, press and hold the Up button (6) to enable or disable PIP.
 After enlarging the image on the home screen by pressing the Up button (6), the image
shown in the PIP window is also enlarged to 2×. For example, if the image on the home
screen is enlarged by 2.0×, 4.0×, 6.0×, or 8.0×, the image shown in the PIP window will be
enlarged by 4.0×, 8.0×, 12.0×, or 16.0×, respectively.
XVII. Stadiametric Rangefinding
The Cabin series provides stadiametric rangefinding, which allows you to calculate the
approximate distance from a target with a known size. This function cannot be used when a day
scope is connected.
 On the home screen, press and hold the Up button (6) + M button (7) to enable or
disable this function;
 After this function is enabled, two lines used for measuring appear in the middle part of
the image, and three icons of pre-configured objects and the values of measurement
distance are displayed on the right side.
 Three pre-defined target values are provided as follows: