Operating Manual

KEILER PRO 2020 · Operating Manual 03 / 2021
E
N
–
23
22
29. FACTORY RESET
Attention! The image and video files stored in the device are dele-
ted when the device is reset!
>
Short press the Zoom button for factory
reset.
> Short press the Image Mode button or
Photo button to make a yes or no choice,
then short press the Zoom button for a
confirmation.
Aer reset to factory settings, the image of the device will revert
to white hot mode, brightness will be level 2, calibration mode will
be S.
30. CHARGING THE BATTERY
The device is equipped with an internal rechargeable battery
that can be charged via the micro-USB port on the bottom of the
housing. The battery indicator in the lower le corner of the screen
shows the charging level of the battery.
The red flashing LED and a fade-in in the display indicate that only
10% remaining energy is available.
> Please recharge the battery no later than when a low battery
charge (red battery symbol) is displayed.
You can charge the battery with the supplied AC adapter or a
portable power supply such as a USB power bank. A Powerbank
with 4000 mAh capacity can double the runtime. The LED indicator
lights up red when charging and changes to green when the
battery is fully charged. The device can be charged during use,
charging is faster than discharge during use.
The devices Keiler 36 and 50 Pro have an automatic switch-o
function to save energy. Aer 15 minutes in idle mode, the device
switches to standby mode and switches o automatically aer a
further 15 minutes.
31. IMAGE AND VIDEO TRANSFER
Aer connecting the device to your computer via USB cable and
with the device switched on, it functions as a mass storage device
so you can view, copy or delete your images and videos on the
computer.