Quick Start Guide

Copyright © 2020 Infiot All Rights Reserved
https://infiot.com
support@infiot.com
Infiot Extensible Edge Quick Start Guide
iXEdge-101
Follow the simple steps below to bring your Infiot iXEdge-101 online:
Front View Rear View
Step 1. Connect to the Power
Connect the power adapter to the DC power outlet, and connect the other end of the adapter to
the power port on the Edge. When the Edge powers ON, the round indicator light will flash
Amber.
Step 2. Connect to the Internet
Connect the Ethernet cable with Internet connection to the interface labeled as WAN. By default,
Infiot Edge will acquire a DHCP IP address from the ISP on the WAN side. When the WAN
connection is fully operational, the round indicator light will become solid Amber.
Step 3. Activate the Edge from Email
Open the Email with the title started with Infiot Edge Activation Directions, and follow the
instructions in the email. After the successful activation, the round indicator light will become
solid White.
Step 4. Connect Local Devices
Connect local devices such as switches, desktops to ports labeled LAN1, LAN2 or OPT, or
connect to WiFi.
If you are running into issues while activating, please reach out to the reseller.

Summary of content (2 pages)