SAT-1100 OM 1/16/04 12:34 PM Page 1 TOTAL SPEAKER SOLUTIONS SAT-1100 Owner’s Guide
SAT-1100 OM 1/16/04 12:34 PM Page 3 SAT-1100 OWNER’S GUIDE Table of Contents 4 Introduction 4 Placement 5 Wall-Mounting the Satellites 5 Speaker Connections 6 Operation 6 Maintenance and Service 6 Specifications SAT-1100 3
SAT-1100 OM 1/16/04 12:34 PM Page 4 INTRODUCTION Home Theater Infinity Total Solutions ™ Infinity Total Solutions continues Infinity’s longstanding commitment to accurate sound reproduction. Our proprietary Metal Matrix Diaphragm™ (MMD™) drivers, precision dividing networks and rigid, well-braced enclosures combine to deliver uncompromising performance in any stereo or multichannel home theater system. In addition, this speaker is magnetically shielded for safe placement adjacent to a television.
SAT-1100 OM 1/16/04 12:34 PM Page 5 WALL-MOUNTING THE SATELLITES SPEAKER CONNECTIONS The SAT-1100 satellites are designed to be mounted on the wall if desired.There is a wall bracket included for each satellite speaker. Each speaker bracket will require (3) 1-1/2," #10 wood screws; each screw should be fastened to a wall stud. If a wall stud is unavailable, install an anchor appropriate for a 1-1/2," #10 screw.
SAT-1100 OM 1/16/04 12:34 PM Page 6 OPERATION SPECIFICATIONS Surround Modes SAT-1100 When using the system in a Dolby* Digital or DTS home theater system, make sure all SAT-1100 speakers are set to “Small”. Frequency Range: 120Hz – 20,000Hz (±3dB) When using the SAT-1100 in a Dolby Pro Logic* home theater system, make sure the receiver’s center channel mode is set to “Normal.
SAT-1100 OM 1/16/04 NOTES 12:34 PM Page 7
SAT-1100 OM 1/16/04 12:34 PM Page 8 © 2003 Harman International Industries, Incorporated Infinity Systems, 250 Crossways Park Drive, Woodbury, NY 11797 USA 516.674.4INF (USA only) www.infinitysystems.com * Trademarks of Dolby Laboratories. DTS is a registered trademark of Digital Theater Systems, Inc. Infinity is a registered trademark, and Total Solutions and MMD are a trademarks, of Harman International Industries, Incorporated. Part No.
