PS212W.PS210W.
PS212W.PS210W.OM 9/15/08 2:17 PM Page 2 IMPORTANT SAFETY PRECAUTIONS READ FIRST! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9.
PS212W.PS210W.OM 9/15/08 2:17 PM Page 3 INTRODUCTION PLACEMENT Infinity® PS210W/PS212W Powered Subwoofers Since the installation of a subwoofer can be somewhat more complicated than installing full-range speakers, it is essential that you read this section very carefully prior to connecting the subwoofer to your system. Should you have questions relating to your installation, it is advisable to call your dealer or visit www.infinitysystems.com for assistance.
PS212W.PS210W.
PS212W.PS210W.OM 9/15/08 2:17 PM Page 5 SYSTEM CONNECTIONS Choose either Wireless or Wired Connection; then follow the appropriate instructions. WIRELESS WIRED Connecting the Subwoofer for Wireless Applications Connecting the Subwoofer for Wired Applications If you have a Dolby® Digital or DTS® receiver/processor with a low-frequency effects (LFE) or subwoofer output: ID CODE DC18V 1 2 3 4 Sub In Step 1.
PS212W.PS210W.OM 9/15/08 2:17 PM Page 6 OPERATION Power On Connect your signal source (such as an A/V receiver or preamplifier) to the transmitter (if using a wireless connection) or to the subwoofer (if using a wired connection).Two single-RCA cords are provided.While you would ordinarily use the short cable to connect to the transmitter, or the long one to connect to the subwoofer, either cable can be used, depending on proximity to the signal source.
PS212W.PS210W.OM 9/15/08 2:17 PM Page 7 SPECIFICATIONS A Word About Wireless Products Infinity wireless subwoofers utilize advanced wireless transceivers operating in the 2.4GHz frequency band.This is the same frequency band that is used for wireless home networks and high-quality cordless phones. It also allows for the transmission of high-performance, full-spectrum sound to remote locations, wirelessly.
PS212W.PS210W.OM 9/15/08 2:17 PM Page 8 Harman Consumer Group, Inc., 250 Crossways Park Drive, Woodbury, NY 11797 USA 516.674.4463 (USA only) www.infinitysystems.com Infinity and MMD are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Dolby is a registered trademark of Dolby Laboratories. DTS is a registered trademark of DTS, Inc. Part No. 406-000-05856-E 9/08 © 2008 Harman International Industries, Incorporated. All rights reserved.