Instructions / Assembly

8
17
Port for controller line
Screw cap
Connector of controller line
Step 5: Remote Control Installation
Connect the data line of the controller to the port on the inside of right
armrest (pay attention to the convex-concave between connector and port);
then fix the screw cap. (See the figure below.)
PREPARATION BEFORE USING
Step 6: Other Accessories
Connect the power wire connector to the port on the outside of right
armrest.
Turn on the chair, and use the controller to raise the backframe to
normal position.
MODE
PART
WIDTH
SPEED
ROLLER
ZERO
MODE
PART
WIDTH
SPEED
ROLLER
ZERO
AUTO
MANUAL
3D MASSAGE
AIRBAG
HEAT
SETTING
3D MASSAGE 3D MASSAGE
MODE
FORCE
PART
Deep shiatsu
Healthy breath
Massage extend
MODE
FORCE
PART
NAME AND FUNCTION OF EACH COMPONENT
ROLLERS:Press MENU button first, then choose ROLLER. Adjust the roller
speed from 1 to 3, or stop the rollers by pressing up or down button.
ZERO GRAVITY: Zero gravity creates a completely relaxing, naturally
comfortable massage position. This design places the back, buttocks, and
legs in the same angle that astronauts experience in space. Zero gravity provides
a sense of weightlessness and promotes circulation and a steady heart rate.
3D MASSAGE
Press MENU button first, then choose 3D. Adjust the 3D MODE by choosing
from Deep Shiatsu, Healthy Breath, and Massage Extend. You can also adjust
massage force and part.
Deep Shiatsu: Deep shiatsu on the back for 10 minutes
Healthy Breath: 5 minutes of healthy breath massage
with rhythm for breathing in and out
Massage Extend: 5 minutes of massage and extension
FORCE: Under FORCE function, 3D massage intensity
offers levels 1 to 5.
PART: Under PART function, press right button, then
press up or down button to choose whole, partial or point.
3D MASSAGE
MODE
FORCE
PART
Power On/Off
Power cord
Power cord port
Power cord connector