72 Stard Rd, Unit 2 Seabrook, NH 03874 P: 603.910.5000 | F: 603.642.9291 www.infinitymassagechairs.
Thank you for your purchase of this product. Before using, please read this USER MANUAL carefully, and pay special attention to the safety precaution to ensure proper operation and use. Please keep this USER MANUAL properly for further reference.
TECHNICAL SPECIFICATIONS Name: Infinity Deluxe Massage Chair SAFETY PRECAUTIONS Safety Precautions Before using, please read the SAFETY PRECAUTIONS carefully to ensure correct operation of the massage chair. Model: Infinity Genesis SE Rated voltage: 220-240V~ Rated frequency: 50/60 Hz WARNING Incorrect operation may cause user injury. CAUTION Incorrect operation may cause user injury or product damage. Rated power: 180W Prohibited. Specific instruction will be indicated in the diagram drawings.(e.g.
SAFETY PRECAUTIONS CAUTION COMPULSORY TROUBLESHOOTING No. We advise that new users not use the massage chair for more than 20 minutes at a time. Place the massage chair on a level surface. When adjusting the legrest or backrest, do not use excessive force on it. Ensure children and pets are clear of the chair during use. When unplugging the chair, hold the plug. Do not pull the power cord. Do not use a power supply that is beyond the specified electric voltage.
PRODUCT STORAGE AND MAINTENANCE Maintenance NAME AND FUNCTION OF EACH COMPONENT External Structure Dampen a soft cloth in neutral detergent and wipe down the chair’s back cover, hand rest, legrest, air tube and plastic components, then dry them with a dry cotton cloth. Use dry cloth to wipe the controller and power supply box.
PREPARATION BEFORE USING NAME AND FUNCTION OF EACH COMPONENT Controller Legrest Operation To adjust the legrest, press or to extend or retract the legrest manually while it is static in order to get the best massage. Legrest extending Display screen Legrest retracting On/Off Shoulder position adjustment Menu Up Legrest can be extended or retracted automatically or manually according to different position and height because of the massage chair’s body scan sensor.
PREPARATION BEFORE USING Initial Massage Chair Setup Before setting up the massage chair, make sure it has plenty of clearance. Then use the controller to recline the chair backrest, raise the legrest, and fully extend the massage chair. Test all functions to ensure they are working normally, then power off the chair and return to its original position. To learn more about selecting a program, please refer to Controller Instructions and Display Screen Menu Instructions.
PREPARATION BEFORE USING NAME AND FUNCTION OF EACH COMPONENT Back up Press this button to raise the backrest. Release button to stop. Back down Press this button to lower the backrest. Release button to stop. Legrest extend Press this button to extend the legrest. Release to stop. Moving the Massage Chair There are moving rollers at the bottom of the chair. Raise the back to the highest point. Turn off and unplug the chair. Lift the front part of the chair as shown below.
NAME AND FUNCTION OF EACH COMPONENT PREPARATION BEFORE USING Position & Placement for Installation Safe placement for the massage chair: Ensure there is adequate space for installing the chair. Back: Minimum 4 in. from the wall and any objects or obstacles. Front: Minimum 24 in. from any objects or obstacles. 4 in. 24 in. Rest & Sleep: This mild massage is great for your lunch break or before sleeping. It kneads the entire body with heavy and light intensity massage to relieve tired muscles gradually.
PREPARATION BEFORE USING After the calf is connected to the axle, fasten it with the lock on the left and right side. (See the figure below) lock connecting axis NAME AND FUNCTION OF EACH COMPONENT AIRBAG Press MENU button first, then choose AIRBAG, press up or down button to choose airbag place and force. AUTO MANUAL 3D MASSAGE AIRBAG HEAT SETTING PART: Under AIRBAG PART function, press right button, then press up or down button to choose Full, Arm & Shoulder, Back & Waist, Leg & Foot, or Buttock.
PREPARATION BEFORE USING NAME AND FUNCTION OF EACH COMPONENT ROLLERS:Press MENU button first, then choose ROLLER. Adjust the roller speed from 1 to 3, or stop the rollers by pressing up or down button. ZERO GRAVITY: Zero gravity creates a completely relaxing, naturally comfortable massage position. This design places the back, buttocks, and legs in the same angle that astronauts experience in space. Zero gravity provides a sense of weightlessness and promotes circulation and a steady heart rate.
PREPARATION BEFORE USING NAME AND FUNCTION OF EACH COMPONENT SETTING Press MENU button, choose SETTING, then press up or down button to set time, language, or Bluetooth. ÖÎ AUTO MANUAL Step 3: Legrest Installation Lift the legrest and connect the hook on the legrest to the coupling shaft on the seat frame. Repeat on the other side.
PREPARATION BEFORE USING Installation Method Step 1: Unpack the massage chair Unpack the cartons, carefully taking out pads and cushions, accessories box, and unit pieces. Check all accessories with packing list. Step 2: Installation of Armrest Units First, connect the seat’s air tube plug to the armrest’s air tap port. Hang the hook of the armrest unit to the connecting rod of the backrest, and then connect the armrest to the side of seat frame. Push the armrest down to secure it in place.
FUNCTIONS AND FEATURES 1: SPACE-SAVING FUNCTION The Genesis SE massage chair has the ability to move forward before performing a massage. This allows it to be placed closer to the wall than a standard massage chair. Keep this in mind when positioning the chair. 2: ZERO GRAVITY Zero gravity creates a completely relaxing, naturally comfortable massage position. This design places the back, buttocks, and legs in the same angle that astronauts experience in space.
