Assembly Guide

Dynasty 4D
Massage Chair
Assembly
Guide
72 Stard Road, Seabrook, NH 03874 [phone] www.infinitymassagechairs.com
Review chair for smooth operation. If things are not
operating correctly, review all assembly steps. Call
Infinity support at 1-603-910-5000 if you need live
US-based support.
If you wish to use an APP to control the chair,
download from the Apple or Google app store and
follow pairing instruction found within the APP.
You are done; time for a Massage!
Double check that all air hoses are
still firmly connected in the back of
the chair under the armrests.
Turn on the Main
power switch.
Ensure the Footrest assembly
swings freely up and down,
Electrical connections are firmly
attached and air hose is secure.
Remove the foot pads to increase
foot roller intensity, if desired.
Power on the
remote and select
AUTO program to
start a session.
GENESIS MAX 4D
Plug the chair into a
grounded 110V electrical
outlet
Zipper the closure between the
Footrest and Chair Body
Final Check:
Go to www.infinitymassagechairs.com/warranty to register your chair
and enable full support for your warranty.
You can see the
connections
in the back of
the chair,
underneath the
arms when fully
upright.
2
Step 2:
Place the chair body
on a soft surface for
assembly. Determine
the left arm panel
from the right and
place next to the
correct side of the
chair.
Step 3:
Note the 3 locations each arm
attaches to the chair body;
locations A, B and C.
3
Step 4:
4
Chair BodySide Panel Side Panel
1
Step 1:
Carefully check box contents to the detail
below, making sure all contents are
accounted for.
If anything is missing, please contact INFINITY at
603-910-5000. Do not return to the place of purchase.
Box 1:
Chair Body &
Accessory Box
Box 2:
Side Arm
Panels
(2)
Box 3:
Footrest (1)
Foot Pads
(2 pcs)
Bolt: M8 x 16 mm (2 pcs)
Washer: M8 x 24 mm (4 pcs)
Bolt: M8 x 40 mm (2 pcs)
Spare Clips
M8 Hex Key
Philips Screw
Driver
Power
Cord
Fuse
Accessory Box
Dynasty 4D
Massage Chair
Quick Start
Guide
User Manual
DYNASTY 4D
M A SSAGE CHAIR
Remote
Control
Dynasty 4D
Massage Chair
Assembly
Guide
Warranty
Card
www.infinitymassagechairs.com/assembly-
tutorials to watch an assembly video.
Or Scan Code
HOME
A
B
C
Locate the Air Hoses off each side
of chair body and note each hose
has a number. Locate the corre-
sponding number on the Air Ports
of each Arm. Firmly connect the
hoses to the ports by matching
the numbers of each.
Locate the electrical
wires off the chair
body. One wire on
the right side and
a two wires on the
left side. Firmly
clip each into the
corresponding
electrical port.
Air port
connection
Air and electrical
port connection
Electrical port connections
Remote
Pouch
Version 1.2