Assembly Guide

ManualsBrandsInfinity ManualsHealth and Fitness EquipmentDynasty 4D Massage Chair in Brown Color

Step 5:

Carefully lift each arm and hook

on the rail to support the arm.

Make sure the air hoses and

electrical wires remain

connected and not

pinched.

Step 6:

Next locate the Pin in position A

on the Arm and secure it under

the Pin Retainer on the Chair

body in position A from

step 3.

Step 7:

Locate the long, silver M8 Bolts

(2), Washers (2) and hex key tool

from the Accessory Box. Fasten

this bolt and washer under the

Velcro flap just below the shoulder

air bag (Position B) until snug;

do not tighten yet.

Step 8:

Locate the shorter,

black M8 Bolts (2) and

Washers (2) from the

Accessory Box. Fasten

this bolt and washer in

Position C. When

secured, tighten both

positions C and B on

both arms.

Step 9:

Locate the Power Cord,

Remote Control and

Remote pouch from the

Accessory Box. Attach

each to the chair body in

locations on the illustration,

being careful to line

up electrical pins and

prongs. The Pouch

attaches to the Velcro

found under the right arm

massage.

Step 10:

Plug the chair into a grounded electrical outlet. Power on the

Main power switch and press the Power button on the

remote until the chair uprights out of shipping position.

(you may need to press power more than once).

Step 11:

Unplug chair from

electrical source. Locate

Footrest and place on

floor adjacent to chair

body. Attach the 3

electrical connectors

and air hose to air port.

Step 12:

Remove the clips on the

Chair Body Pins by

sliding up. (If Clips are

missing, there are spare

clips in the Accessory

Box)

Lift the Footrest and

position the hinge of on

body pin. Carefully align

the other side hinge over

the pin and center the

Footrest. Fasten the

clips over the pins to

retain both sides of

the footrest.

Power cord

Main Switch

Remote Pouch

Hook to Rail

Pin retainer

Slide Pin under

Retainer to

secure

Short Bolt

Washer

Position C

Main Switch

GENESIS MAX 4D

Remote Power

Switch

Long Bolt

Washer

Position B

Remote cord

connection

Align pins, push together,

screw fastening ring

Footrest drive

connector port

Air nozzle

Air hose

Footrest drive

connector plug

Footrest power

connector plug

Footrest air valve

connector plug

Footrest power

connector port

Footrest air

connector port

Leads from

the

Footrest

(Box 3)

Chair Body Pin

Location

Chair Body Pin

Location

Remove Clips from Body Pins by sliding up

Slide Hinge

over Pin on

each side

Slide Clips

over Pin to

Fasten

Footrest in

place

M8 x 16

M8 x 24

M8 x 40

M8 x 24

Right

Left

Hinge

Summary of content (2 pages)

PAGE 1
5 Step 5: Carefully lift each arm and hook on the rail to support the arm. Make sure the air hoses and electrical wires remain connected and not pinched. 6 Hook to Rail Pin retainer Step 6: Next locate the Pin in position A on the Arm and secure it under the Pin Retainer on the Chair body in position A from step 3. Slide Pin under Retainer to secure 7 Step 7: Locate the long, silver M8 Bolts (2), Washers (2) and hex key tool from the Accessory Box.
PAGE 2
Version 1.2 72 Stard Road, Seabrook, NH 03874 (603) 910-5000 www.infinitymassagechairs.com Dynasty 4D Massage Chair Go to www.infinitymassagechairs.com/warranty to register your chair and enable full support for your warranty. GENESIS MAX 4D You are done; time for a Massage! If you wish to use an APP to control the chair, download from the Apple or Google app store and follow pairing instruction found within the APP. Power on the remote and select AUTO program to start a session.