Specification Sheet

®
Page 1 of 3
Dimensions are subject to manufacturer’s tolerance and change without notice. We can assume no responsibility for use of superceded or void data.
FM551-05-20
Innity Drain
145 Dixon Avenue
Amityville, NY 11701
Phone: [phone]
Fax: [phone]
www.innitydrain.com
NOTE: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and com-
pliance to local and national codes are the
responsibility of the installer.
UTIF Series
Universal Innity Drain™
▪ UTIF 24 - 24” Complete Kit
▪ UTIF 30 - 30” Complete Kit
▪ UTIF 32 - 32” Complete Kit
▪ UTIF 36 - 36” Complete Kit
▪ UTIF 42 - 42” Complete Kit
▪ UTIF 48 - 48” Complete Kit
▪ UTIF 54 - 54” Complete Kit
▪ UTIF 60 - 60” Complete Kit
Features
▪ Pre-pitched channel available in ABS or PVC
▪ 18 Gauge 304L clamping collar and removable decorative tile insert frame
▪ Compatible with Traditional OR Contemporary Waterproong
▫ Traditional Waterproong: PVC Liner, Rubber Liner, or Fiberglass
▫ Contemporary Waterproong: liquid applied or fabric membrane
▪ Two clamping collar heights available (1/2” or 1”)
▪ Clamping collar can be used facing up or down
▪ Flow rate - 9 gpm per outlet
▫ Flow rate measured at outlet only. Measurement does not account
for water in channel or sheeting on shower oor.
Installation with Traditional Waterprooong
Care & Maintenance
UTIF Series stainless steel linear grates are made of 304L stainless steel. This material is non-porous, hygienic, rust-free and extremely durable. Bar Keepers Friend®
and Soft Scrub® are commonly available products that can be used to protect and clean your Satin Stainless drain cover. For stains that have been left for an exces-
sive amount of time, stronger cleaning agents such as Steel Brite® may be needed. For Polished Stainless and other nishes we recommend a mild soap and a soft
cloth for cleaning. DO NOT use any abrasive cleaners, scrub pads or allow household cleaning agents, such as bleach, to sit on the drain cover for a long period of
time. Stainless steel does not rust. External factors, such as contamination from other highly ferrous metals, built up road salt, sea salt, or chlorine may have caused
”surface” rust which can be removed using Barkeepers Friend®, Soft Scrub®, or Steel Brite® . Always follow the directions on the bottle. Follow proper maintenance
procedures to prevent excessive surface rust. In areas of frequent exposure to salt, chlorine, and other chemical compounds, maintenance of the stainless grates
should be performed at least 2-3 times per year.
Installation with Contemporary Waterprooong
A
B
C
D
E
F
G
H
I
J
A
B
C
D
E
F
G
H
I
A
B
C
D
E
F
G
H
I
J
- UC 65 Universal Channel
- NA 65 Tile Insert Frame
- CC Clamping Collar (1/2” or 1” High)
- Backerboard
- Suboor
- Primary Mortar Bed
- Waterproong Membrane
- Secondary Mortar Bed
- Thinset
- Tile/Stone
A
B
C
D
E
F
G
H
I
- UC 65 Universal Channel
- NA 65 Tile Insert Frame
- CC Clamping Collar (1/2” or 1” High)
- Backerboard
- Suboor
- Primary Mortar Bed
- Liquid or Fabric Membrane
- Thinset
- Tile/Stone