Specification Sheet

S-TIF 6580 S-TIF 6596
A
A
A
B
Page 3 of 3REV. 08.01.15
Dimensions are subject to manufacturers tolerance and change without notice. We can assume no responsibility for use of superceded or void data.
Innity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: [phone]
Fax: [phone]
www.Innity Drain.com
NOTE: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and com-
pliance to local and national codes are the
responsibility of the installer.
Model
Number
Complete Kit Contents
A
(Maximum Overall Length)
B
(Maximum Grate Length)
C
(Minimum Height Above Waterproong)
* All heights can be adjusted upwards an
additional 1-1/4”
S-TIF 6580
2 - TA 6540 Tile Insert Frame
1 - G 6580 PVC Channel
2 - E 65 PVC Stop End
2 - S 50 PVC Threaded Outlet
2 - HS 2 2” Hair Strainer
2 - CT 80 Channel Trim
1 - AKEY Lift Out Key
80”
39 7/8”
(x 2)
With CDI 22: 2-3/8”
With CDA 22: 1-7/8”
With CDP 22: 1-7/8”
S-TIF 6596
2 - TA 6548 Stainless Steel Grate
1 - G 6596 PVC Channel
2 - E 65 PVC Stop End
2 - S 50 PVC Threaded Outlet
2 - HS 2 2” Hair Strainer
2 - CT 96 Channel Trim
1 - AKEY Lift Out Key
96”
47 7/8”
(x 2)
With CDI 22: 2-3/8”
With CDA 22: 1-7/8”
With CDP 22: 1-7/8”
□
Optional Components
F 65 PVC Non-Threaded Outlet
GJC 65 PVC Straight Joiner Strip
GAM 65 PVC 90° Angle Joiner
TNRN-P PVC Threaded Extension Nipple
UCP 2 Universal 2” Clamping Plate
UCP 4 Universal 4” Clamping Plate
UCP 42
Universal Reducing Plate
(Adapts 4” or 3” existing throat size to 2”)
Add Clamp Down Drain
CDA 22 Clamp Down Drain ABS
CDI 22 Clamp Down Drain Cast Iron
CDP 22 Clamp Down Drain PVC
Available components for longer lengths
TA 6540 40” Tile Insert Frame
TA 6548 48” Tile Insert Frame
TA 6560 60” Tile Insert Frame
G 6536 36” PVC Channel
G 6548 48” PVC Channel
G 6560 60” PVC Channel
G 6596 96” PVC Channel
G 6580 80” PVC Channel
G 65108 108” PVC Channel
E 65 PVC Stop End
S 50 PVC Threaded Nipple
CT 36 36” Channel Trim
CT 48 48” Channel Trim
CT 60 60” Channel Trim
CT 96 96” Channel Trim
2
7
8
"
C
2"
3
4
"
6
1
2
"
2
1
2
"
2
3
8
"
1
11
16
"
SECTION A-A
TIF-PL BOTTOM PLATE
TIF-PL TOP PLATE
#8 SCREWS
OPTIONAL PLATES FOR
LENGTH ADJUSTMENT
G 65 PVC CHANNEL
S 50 PVC THREADED OUTLET
E 65 PVC STOP END
2 INCH CLAMP DOWN DRAIN ASSEMBLY
(MATERIAL CAN BE CAST IRON, ABS OR PVC)
FINISHING MATERIAL (NOT INCLUDED)
TA 65 TILE INSERT FRAME
□