Specification Sheet

S-DG 6596 ONLY
A
A
A
A
A
B
Page 3 of 3REV. 08.01.15
Dimensions are subject to manufacturers tolerance and change without notice. We can assume no responsibility for use of superceded or void data.
Innity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: [phone]
Fax: [phone]
www.Innity Drain.com
NOTE: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and com-
pliance to local and national codes are the
responsibility of the installer.
Model
Number
Complete Kit Contents
A
(Maximum Overall Length)
B
(Maximum Grate Length)
C
(Minimum Height Above Waterproong)
* All heights can be adjusted upwards an
additional 1-1/4”
S-DG 6596
2 - D 6548 Stainless Steel Grate
1 - G 6596 PVC Channel
2 - E 65 PVC Stop End
2 - S 50 PVC Threaded Outlet
2 - HS 2 2” Hair Strainer
2 - CT 96 Channel Trim
1 - DKEY Lift Out Key
96”
47 7/8”
(x 2)
With CDI 22: 2-3/8”
With CDA 22: 1-7/8”
With CDP 22: 1-7/8”
□
Finishes
□ Satin Stainless □ Polished Stainless □ Lifetime Oil Rubbed Bronze
Optional Components
F 65 PVC Non-Threaded Outlet
GJC 65 PVC Straight Joiner Strip
GAM 65 PVC 90° Angle Joiner
TNRN-P PVC Threaded Extension Nipple
UCP 2 Universal 2” Clamping Plate
UCP 4 Universal 4” Clamping Plate
UCP 42 Universal Reducing Plate
(Adapts 4” or 3” existing throat size to 2”)
Add Clamp Down Drain
CDA 22 Clamp Down Drain ABS
CDI 22 Clamp Down Drain Cast Iron
CDP 22 Clamp Down Drain PVC
2” clamp down drain not
included in kit
Available components for longer lengths
D 6548 48” Stainless Steel Grate
D 6560 60” Stainless Steel Grate
G 6536 36” PVC Channel
G 6548 48” PVC Channel
G 6560 60” PVC Channel
G 6596 96” PVC Channel
G 65108 108” PVC Channel
E 65 PVC Stop End
S 32 PVC Outlet Section
S 50 PVC Threaded Nipple
CT 36 36” Channel Trim
CT 48 48” Channel Trim
CT 60 60” Channel Trim
CT 96 96” Channel Trim
2 INCH CLAMP DOWN DRAIN ASSEMBLY
(MATERIAL CAN BE CAST IRON, ABS OR PVC)
S 50 PVC THREADED OUTLET
G 65 PVC CHANNEL
E 65 PVC STOP END
(2)D 65 GRATES