Specification Sheet

S-DG 6548 S-DG 6560
A
A
A
B
2 INCH CLAMP DOWN DRAIN ASSEMBLY
(MATERIAL CAN BE CAST IRON, ABS OR PVC)
S 50 PVC THREADED OUTLET
G 65 PVC CHANNEL
E 65 PVC STOP END
D 65 GRATE
Page 2 of 3REV. 08.01.15
Dimensions are subject to manufacturers tolerance and change without notice. We can assume no responsibility for use of superceded or void data.
Innity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: [phone]
Fax: [phone]
www.Innity Drain.com
NOTE: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and com-
pliance to local and national codes are the
responsibility of the installer.
Model
Number
Complete Kit Contents
A
(Maximum Overall Length)
B
(Maximum Grate Length)
C
(Minimum Height Above Waterproong)
* All heights can be adjusted upwards an
additional 1-1/4”
S-DG 6548
1 - D 6548 Stainless Steel Grate
1 - G 6548 PVC Channel
2 - E 65 PVC Stop End
1 - S 50 PVC Threaded Outlet
1 - HS 2 2” Hair Strainer
2 - CT 48 Channel Trim
1 - DKEY Lift Out Key
48” 47 7/8”
With CDI 22: 2-3/8”
With CDA 22: 1-7/8”
With CDP 22: 1-7/8”
S-DG 6560
1 - D 6560 Stainless Steel Grate
1 - G 6560 PVC Channel
2 - E 65 PVC Stop End
1 - S 50 PVC Threaded Outlet
1 - HS 2 2” Hair Strainer
2 - CT 60 Channel Trim
1 - DKEY Lift Out Key
60” 59 7/8”
With CDI 22: 2-3/8”
With CDA 22: 1-7/8”
With CDP 22: 1-7/8”
Finishes
□ Satin Stainless □ Polished Stainless □ Lifetime Oil Rubbed Bronze
□
□