Specification Sheet

S-AS 6572 S-AS 6596
A
A
A
A
A
B
Page 3 of 3REV. 08.01.15
Dimensions are subject to manufacturers tolerance and change without notice. We can assume no responsibility for use of superceded or void data.
Innity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: [phone]
Fax: [phone]
www.Innity Drain.com
NOTE: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and com-
pliance to local and national codes are the
responsibility of the installer.
Model
Number
Complete Kit Contents
A
Maximum
Overall Length
B
Maximum
Grate Length
C
(Minimum Height Above Waterproong)
* All heights can be adjusted upwards an
additional 1-1/4”
S-AS 6572
2 - SA 6536 Stainless Steel Grate
1 - LC 6564 Stainless Steel Channel
2 - LF 65 8” Outlet Section Stainless Steel
4 - GJS 65 Stainless Steel Joiner Strip
2 - TNAS Threaded Nipple
1- ZSIKA Sikaex 1a Sealant
2 - HS 2 Hair Strainer
2 - CT 72 Channel Trim
1 - AKEY Lift Out Key
72”
35 7/8”
(x 2)
With CDI 22: 1-1/2”
With CDA 22: 1-3/16”
With CDP 22: 1-3/16”
S-AS 6596
2 - SA 6548 Stainless Steel Grate
1 - LC 6588 Stainless Steel Channel
2 - LF 65 8” Outlet Section Stainless Steel
4 - GJS 65 Stainless Steel Joiner Strip
2 - TNAS Threaded Nipple
1- ZSIKA Sikaex 1a Sealant
2 - HS 2 Hair Strainer
2 - CT 96 Channel Trim
1 - AKEY Lift Out Key
96”
47 7/8”
(x 2)
With CDI 22: 1-1/2”
With CDA 22: 1-3/16”
With CDP 22: 1-3/16”
□
Optional Components
TNAS-2 2” Long Stainless Steel Resure Nipple
TNAS-3 3” Long Stainless Steel Resure Nipple
TNAS-4 4” Long Stainless Steel Resure Nipple
TNRN-P PVC Threaded Extension Nipple
UCP 2 Universal 2” Clamping Plate
UCP 42
Universal Reducing Plate
(Adapts 4” or 3” existing throat size to 2”)
Add Clamp Down Drain
CDA 22 Clamp Down Drain ABS
CDI 22 Clamp Down Drain Cast Iron
CDP 22 Clamp Down Drain PVC
Available components for longer lengths
SA 6536 36” Wedge Wire Grate
SA 6548 48” Wedge Wire Grate
SA 6560 60” Wedge Wire Grate
SC 6548 48” Stainless Open Ended Channel
SC 6596 96” Stainless Open Ended Channel
LC 6528 28” Stainless Closed Channel
LC 6540 40” Stainless Closed Channel
LC 6552 52” Stainless Closed Channel
LC 6564 64” Stainless Closed Channel
LC 6588 88” Stainless Closed Channel
SE 65 2” Stainless Steel End Section
GJS 65 Stainless Steel Joiner Strip
SLA 65 Stainless Steel 90° Angle Joiner
HS 2 2” Hair Strainer
LF 65 8” Stainless Steel Outlet Section
TNAS Stainless Steel Threaded Nipple
CT 36 36” Channel Trim
CT 48 48” Channel Trim
CT 60 60” Channel Trim
CT 72 72” Channel Trim
CT 96 96” Channel Trim
2
7
8
"
1"
6
1
2
"
2
1
2
"
2"
C
SECTION A-A
□