Specification Sheet

Page 4 of 4FM531-12-19
Dimensions are subject to manufacturers tolerance and change without notice. We can assume no responsibility for use of superceded or void data.
Infi nity Drain
145 Dixon Avnue
Amityville, NY 11701
Phone: [phone]
Fax: [phone]
www.Infi nitydrain.com
NOTE: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and com-
pliance to local and national codes are the
responsibility of the installer.
Optional Components
F 65 PVC Non-Threaded Outlet
GJL 65 PVC Straight Joiner Strip
GAL 65 PVC 90° Angle Joiner
TNRN-P PVC Threaded Extension Nipple
UCP 2 Universal 2” Clamping Plate
UCP 4 Universal 4” Clamping Plate
UCP 42 Universal Reducing Plate
(Adapts 4” or 3” existing throat size to 2”)
Add Clamp Down Drain
CDA 22 Clamp Down Drain ABS
CDI 22 Clamp Down Drain Cast Iron
CDP 22 Clamp Down Drain PVC
Available components for longer lengths
KA 6536 36” Stainless Steel Grate
KA 6548 48” Stainless Steel Grate
KA 6560 60” Stainless Steel Grate
KA 6572 72” Stainless Steel Grate
KA 6596 96” Stainless Steel Grate
GL 6536 36” PVC Channel
GL 6548 48” PVC Channel
GL 6560 60” PVC Channel
GL 6572 72” PVC Channel
GL 6596 96” PVC Channel
GL 65108 108” PVC Channel
EL 65 PVC Stop End
SL 65 PVC Outlet Section
S 50 PVC Threaded Nipple
CT 36 36” Channel Trim
CT 48 48” Channel Trim
CT 60 60” Channel Trim
CT 72 72” Channel Trim
CT 96 96” Channel Trim
NOTE: For indoor applications and outdoor applica-
tions where exposure to users without footwear is
possible Channel trim (CT) is not recommended on
drains over 96” or drains with confi gurations that
include turns.
The installation of channel trim on site sizable linear
drains that fall within the outlined conditions listed
are at the judgement of the installer, independent of
Infi nity Drain, LTD.
Wall to Wall Installation
One way to ensure proper drainage is to install the linear
drain from wall-to-wall. The Site Sizeable (S) Series is a fl exible
solution, which allows for ”site sizing” the length of the drain by
cutting the grate and channel to the exact fi nished wall- to-wall
dimension. Infi nity Drain’s FX, FF, & FT series can be custom
fabricated for the exact desired length and outlet location.
ADDITIONAL INFORMATION
Against a Wall Installation
The (S) Site Sizeable and Fixed (FX) Series require a traditional
clamping drain body for PVC Liner, Chloroloy, Lead Pan, Cop-
per, Fiberglass, and Hot Mop type waterproofi ng. The diameter
of the clamp down drain body creates a challenge for fl ush
against the wall installations.
To properly achieve against the wall installations, it is recom-
mended to build out the back wall with a double layer of wall
board.
Threshold Installation
For threshold installs, we recommend the drain run exactly
wall-to-wall to block any water from leaving the shower or wet
area. We do not recommend thinner or tile-in type drains for
threshold installations due to the lack of channel width needed
to suffi ciently catch the water.
Site Sizable models that are NOT recommended for Threshold
Installation include:
S-AG 38, S-LAG 38, S-LT 38, S-DG 38, S-TIFAS 65,
S-TIF 65, S-TIFAS 99
Outlets
Site sizable products can be used in both indoor and outdoor
applications. For indoor installations, we recommend one
outlet for every 60” of drain. Our 72”, 80”, and 96” kits come
standard with two outlet assemblies. Site Sizeable (S) Series can
add additional outlet components to the kit. Outdoor installa-
tions: Outlet frequency is dependent on drain application and
geographic location. Please contact us with questions regarding
your specifi c installation.
Infi nity Drain’s Site Sizable (S) linear drains can be joined together to create infi nite lengths for
outdoor and indoor applications. We off er threaded and non-threaded outlets, 90° angle
joiners, straight joiners, and custom fabrication.