Installation Sheet

2
KEY
(A) Top Grate –
A38/D38/A65/TA65/A100
(B) PVC Channel –
G38/G65/G100
(C) Stop End – E38/E65/E100
(D) Outlet Section – S32/S65
(Not Applicable for AG100)
(E) Threaded Nipple - S50
(F65 – non-threaded
nipple, for no-hub
installation)
Weep Holes
Waterproong Membrane
(F)
2” Throat Clamp Down
Drain Body*
(Two Pieces)
(F1)
(F2)
S-AG 38 Series
A 3836 36″StainlessSteelGrate
A 3848 48″StainlessSteelGrate
A 3860 60″StainlessSteelGrate
G 3836 36″PVCChannel
G 3848 48″PVCChannel
G 3860 60″PVCChannel
G 3896 96″PVCChannel
E 38 PVC Stop End
S 32 PVC Outlet Section
S 50 PVC Threaded Outlet
S-DG 65 Series
D 6548 48″StainlessSteelGrate
D 6560 60″StainlessSteelGrate
G 6548 48″PVCChannel
G 6560 60″PVCChannel
G 6596 96″PVCChannel
E 65 PVC Stop End
S 50 PVC Threaded Outlet
S 65 PVC Outlet Section
S-AG 100 Series
A 1004848″StainlessSteelGrate
G 1004848″PVCChannel
G 1009696″PVCChannel
E 100 PVC Stop End
S 50 PVC Threaded Outlet
S-DG 38 Series
D 3848 48″StainlessSteelGrate
D 3860 60″StainlessSteelGrate
G 3848 48″PVCChannel
G 3860 60″PVCChannel
G 3896 96″PVCChannel
E 38 PVC Stop End
S 32 PVC Outlet Section
S 50 PVC Threaded Outlet
S-AG 65 Series
A 6536 36″StainlessSteelGrate
A 6548 48″StainlessSteelGrate
A 6560 60″StainlessSteelGrate
G 6536 36″PVCChannel
G 6548 48″PVCChannel
G 6560 60″PVCChannel
G 6596 96″PVCChannel
E 65 PVC Stop End
S 50 PVC Threaded Outlet
S 65 PVC Outlet Section
S-TIF 65 Series
TA 654040″StainlessSteelGrate
TA 654848″StainlessSteelGrate
TA 656060″StainlessSteelGrate
G 6540 40″PVCChannel
G 6548 48″PVCChannel
G 6560 60″PVCChannel
G 6580 80″PVCChannel
G 6596 96″PVCChannel
E 65 PVC Stop End
S 50 PVC Threaded Nipple
TIF PL TIF Plates
TKEY Lift Out Key
S 65 PVC Outlet Section
Series Components:
Note: Installer must verify
all rough-in dimensions
prior to installation and
consult local and national
codes. Conformity and com-
pliance to local and national
codes are the responsibility
of the installer.
Tenga en cuenta: Instala-
dor debe comprobar todas
las dimensiones en las par-
tes previa a la instalación
y consultar localmente y
nacionalmente los códigos.
La conformidad y el cum-
plimiento de códigos local
y nacional es responsabili-
dad del instalador.
*Not provided by Innity Drain kits