Specification Sheet

Page 1 of 2

Dimensions are subject to manufacturers tolerance and change without notice. We can assume no responsibility for use of superceded or void data.

NOTE: Installer must verify all rough-in

dimensions prior to installation and consult

local and national codes. Conformity and com-

pliance to local and national codes are the

responsibility of the installer.

Innity Drain

145 Dixon Avnue

Amityville, NY 11701

Phone: 516.767.6786

Fax: 516.740.3066

www.Innity Drain.com

FM070-04-19

MD 5-2 stainless steel throat and decorative plate are made of 304L stainless steel. This material is non-porous, hygienic, rust-free and extremely

durable. Bar Keepers Friend® and Soft Scrub® are commonly available products that can be used to protect and clean your Satin Stainless drain

cover. For stains that have been left for an excessive amount of time, stronger cleaning agents such as Steel Brite® may be needed. For Polished

Stainless and other nishes we recommend a mild soap and a soft cloth for cleaning. DO NOT use any abrasive cleaners, scrub pads or allow

household cleaning agents, such as bleach, to sit on the drain cover for a long period of time. Stainless steel does not rust. External factors, such

as contamination from other highly ferrous metals, built up road salt, sea salt, or chlorine may have caused ”surface” rust which can be removed

using Barkeepers Friend®, Soft Scrub® with Bleach, or Steel Brite® . Always follow the directions on the bottle. Follow proper maintenance pro-

cedures to prevent excessive surface rust. In areas of frequent exposure to salt, chlorine, and other chemical compounds, maintenance of the

stainless grates should be performed at least 2-3 times per year.

• 3/16” thick decorative plate

• 3/8” depth throat

• 304L Stainless Steel Throat and Decorative Plate

• Indoor outdoor use

MD 5-2

Center Drain Series

Complete Kits:

▪ MD 5-2I

▪ MD 5-2P

▪ MD 5-2A

Features

• Grate can be removed completely for cleaning

• Requires traditional 4-way oor pitch

• Flow rate 9 GPM with 2” outlet

Installation

Care & Maintenance

PAGE 1
Complete Kits: ▪▪ MD 5-2I ▪▪ MD 5-2P ▪▪ MD 5-2A MD 5-2 Center Drain Series Features • • • • 3/16” thick decorative plate 3/8” depth throat 304L Stainless Steel Throat and Decorative Plate Indoor outdoor use • • • Grate can be removed completely for cleaning Requires traditional 4-way floor pitch Flow rate 9 GPM with 2” outlet Installation Care & Maintenance MD 5-2 stainless steel throat and decorative plate are made of 304L stainless steel.
PAGE 2
MD 5-2 Specifications 5" 5" MS 5 DECORATIVE PLATE T 52 THROAT 4" OUTLET 2" THROAT CLAMP DOWN DRAIN Components: MD 5-2I 5” x 5” Kit with Cast Iron Drain Body - No Hub Outlet (5” L x 5” W x 3/8” H) 1 - MS 5 Moor Decorative Plate 1 - T 52 2” Throat 1 - CDI 22 Clamp Down Drain Cast Iron 1 - HS 2 Hair Strainer 1 - DKEY Lift Out Key 1 MD 5-2A 5” x 5” Kit with ABS Drain Body (5” L x 5” W x 3/8” H) 1 - MS 5 Moor Decorative Plate 1 - T 52 2” Throat 1 - CDA 22 Clamp Down Drain ABS 1 - HS 2 Hair Strainer 1 - DK