Specification Sheet
• 1” thick tile insert strainer
• 3/8” depth throat
• 16 gauge 304L stainless steel top with ABS base
• Indoor outdoor use
LTD5-2
Center Drain Series
Page 1 of 2
Dimensions are subject to manufacturers tolerance and change without notice. We can assume no responsibility for use of superceded or void data.
NOTE: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and com-
pliance to local and national codes are the
responsibility of the installer.
Infi nity Drain
145 Dixon Avnue
Amityville, NY 11701
Phone: 516.767.6786
Fax: 516.740.3066
www.Infi nity Drain.com
FM051-08-20
LTD 5-2 stainless steel tile inserts are made of 304L stainless steel. This material is non-porous, hygienic, rust-free and extremely durable. Bar
Keepers Friend® and Soft Scrub® are commonly available products that can be used to protect and clean your Satin Stainless drain cover. For
stains that have been left for an excessive amount of time, stronger cleaning agents such as Steel Brite® may be needed. For Polished Stainless
and other fi nishes we recommend a mild soap and a soft cloth for cleaning. DO NOT use any abrasive cleaners, scrub pads or allow household
cleaning agents, such as bleach, to sit on the drain cover for a long period of time. Stainless steel does not rust. External factors, such as con-
tamination from other highly ferrous metals, built up road salt, sea salt, or chlorine may have caused ”surface” rust which can be removed using
Barkeepers Friend®, Soft Scrub® with Bleach, or Steel Brite® . Always follow the directions on the bottle. Follow proper maintenance procedures
to prevent excessive surface rust. In areas of frequent exposure to salt, chlorine, and other chemical compounds, maintenance of the stainless
grates should be performed at least 2-3 times per year.
Complete Kits:
▪ LTD 5-2I
▪ LTD 5-2P
▪ LTD 5-2A
Features
• Grate can be removed completely for cleaning
• Requires traditional 4-way fl oor pitch
• Flow rate 8 GPM with 2” outlet
Installation
Care & Maintenance