Specification Sheet

FTTIF 65 Series
Finishes:
_____
Satin Stainless
_____
Polished Stainless
Complete Kits:
FTTIF 6524 24″CompleteKit
FTTIF 6532 32″CompleteKit
FTTIF 6536 36″CompleteKit
FTTIF 6542 42″CompleteKit
FTTIF 6548 48″CompleteKit
FTTIF 6560 60″CompleteKit
Components:
LA 6524 24″StainlessSteelGrate
LA 6532 32″StainlessSteelGrate
LA 6536 36″StainlessSteelGrate
LA 6542 42″StainlessSteelGrate
LA 6548 48″StainlessSteelGrate
LA 6560 60″StainlessSteelGrate
OC 6524 24″FixedFlangeChannel
OC 6532 32″FixedFlangeChannel
OC 6536 36″FixedFlangeChannel
OC 6542 42″FixedFlangeChannel
OC 6548 48″FixedFlangeChannel
OC 6560 60″FixedFlangeChannel
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: [phone]
Fax: [phone]
www.InfinityDrain.com
REV. 08.01.2013
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
FTTIF 65│Fixed Length
- 16 gauge 304 Stainless Steel grate and channel
- Pre-pitchedchannelwith“Fixed”lengthsand“Fixed”centerside
“tunnel”outletlocation
- Not site sizeable
- Indoor or outdoor use
- Bonded“Flange”installationforflushagainstthewall
- Allows waste line to connect horizontally to save floor height and
waste line relocation
- Lowest height for curbless installations
- Uses Liquid and Fabric Sheet Membrane waterproofing
- Grate can be removed completely for cleaning
- Flow rate 9 GPM per outlet*
*Flow rate measured at outlet only. Measurement does not account
for water in channel or sheeting on shower floor.
Installation (FT) Flange Tunnel