User's Manual
Infinition Inc. Rev. 02
7
4.3 Using the LabRadar
Turn on LabRadar by pressing the Power Button. You will see a blue light to indicate the unit is on.
4.3.1 ALIGNING THE RADAR
Locate a suitable position for your LabRadar and position it within 18 inches to either side of the muzzle of
your firearm. The unit contains a ΒΌ inch x 20 threaded plate on the base of the unit for mounting on a
standard tripod. To properly align the radar look through the sighting notch located in the top center of the
unit and aim the radar at the target that you will be shooting at. Make sure it is in a stable position to insure
that there is no movement after you align it with your target.
Place the LabRadar in a position where it will not be impacted by ejecting cartridge cases, muzzle
debris/blast or other items.
The LabRadar SHOULD NOT be in front of your muzzle. It is acceptable to place your muzzle in front of
the LabRadar. Ideally it should be in a position where you can see the display screen from your position to
prevent unnecessary movement.