User's Manual

Infinition Inc. Rev. 02

4. Operation

A USB cord is provided for connection to a computer. The USB cord is used to power the radar and access

data on the SD card.

The SD card is used to both store data from series and for firmware updates.

A LED is used to indicate the status of the radar:

LED status Description

Off Unit is Off

Blue Unit is powered On, not transmitting.

Red Unit is powered On, transmitting (Armed)

Flashing Red Unit is powered On, transmitting, system will stop transmitting shortly (within

10 seconds) if no trigger is detected.

4.1 Buttons definition

The LabRadar is equipped with an array of buttons each used for a different function:

1. Display / Parameters

2. Series

3. Delete

4. Up

5. Enter

6. Down

7. Power

8. Arm

9. SD Card

10. USB Connector /

External Trigger connector

11. Battery Compartment

12. Sighting Notch

13. LED Indicator

14. Internal acoustic trigger

sensors (2x)

14 14