User's Manual

7. Power Connector Specification
Connector type: Amphenol T3110-000
Pin Description
1 AC Neutral
2 115Vac, 1.0A, 60Hz
3 n/c
4 Protective ground
8. Antenna Connector Specification
Connector type: ITT CANNON MS3124E16-8P
Pin Description
A Not Connected
B Not Connected
C Not Connected
D Remote Make for Antenna Transmitter Control (+ 5 Vdc Output, 1.5kOhm
current limiting resistor)
E Make return
F Doppler Signal + (5 Vpp max.)
G Doppler Signal - (5 Vpp max.)
H Ground
The processor does the remote activation of the transmitter by short circuiting pins D and E.
9. Antenna Warning Device Connector Specification
Connector type: ITT CANNON MS3124E12-3S
Pin Description
A 12 Vdc, 2 amperes maximum (fuse protected)
B Not Connected
C Ground
Infinition Inc. Rev. 01
5